- Home/
- Comparison/
- Grader/
- Fiat-Hitachi FG105 vs. Volvo G976
Fiat-Hitachi FG105 vs. Volvo G976
6 reasons to buy Fiat-Hitachi FG105:
Steerage
Turn radius | 10 m and 7640 m | 100 % less or 7630 m |
Motor
Power measured at | 2300 rev / min and 1700 rev / min | 26 % more or 600 rev |
Hydraulic system
Pump flow rate | 163 l/min and 208 l/min | 22 % less or 45 l/min |
Front Axle
Clearance | 635 mm and 590 mm | 7 % more or 45 mm |
Circle
Maximum radius outside left tyres | 1759 mm and 1970 mm | 11 % less or 211 mm |
Blade tilt rear angle | 27.5 degrees and 6 degrees | 78 % more or 21.5 degrees |
19 reasons to buy Volvo G976:
Operation
Transmission fluid volume | 61 l. and 25 l. | 59 % more or 36 l. |
Hydraulic system fluid volume | 144 l. and 94.6 l. | 34 % more or 49.4 l. |
Each tandem case fluid volume | 100 l. and 30.3 l. | 70 % more or 69.7 l. |
Generator current strength | 80 amperes and 45 amperes | 44 % more or 35 amperes |
Front axle maximum operating weight | 8390 kg and 4210 kg | 50 % more or 4180 kg |
Rear axle maximum operating weight | 15880 kg and 11390 kg | 28 % more or 4490 kg |
Fuel Capacity | 498 l. and 299 l. | 40 % more or 199 l. |
Oil system fluid volume | 39 l. and 20.3 l. | 48 % more or 18.7 l. |
Cooling system fluid volume | 47 l. and 27 l. | 43 % more or 20 l. |
Motor
Maximum power | 195.4 kW and 147 kW | 25 % more or 48.4 kW |
Effective drives torque 7-8 | 1188 Nm and 753 Nm | 37 % more or 435 Nm |
Displacement | 9.4 l. and 8.3 l. | 12 % more or 1.1 l. |
Torque measured at | 1550 rev / min and 1500 rev / min | 3 % more or 50 rev |
Gear box
Reverse gears number | 4 and 3 | 25 % more or 1 |
Maximum forward speed | 43.8 km/h and 42 km/h | 4 % more or 1.8 km/h |
Maximum reverse gear | 30.1 km/h and 27.4 km/h | 9 % more or 2.7 km/h |
Forward gears number | 8 and 6 | 25 % more or 2 |
Dump
Maximum cutting depth | 775 mm and 165 mm | 79 % more or 610 mm |
Circle
Right maximum radius outside tyres | 1960 mm and 2057 mm | 5 % less or 97 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 25 degrees and 21 degrees |
Sizes
Height to cab upper part | 3340 mm and 3225 mm |
Dimensional length | 8521 mm and 9500 mm |
Between tyres width | 2540 mm and 2780 mm |
Wheelbase | 1538 mm and 6531 mm |
Blade base | 2642 mm and 2790 mm |
Operation
Tyre size | 13X24(10PR) and 14:00 x 24, G-2 |
Operating voltage | 24 V and 24 V |
Total maximum operating weight | 15600 kg and 23360 kg |
Motor
Cylinders number | 6 and 6 |
Manufacturer | Cummins and Volvo |
Model | 6 CT8.3 and D9B |
Aspiration | turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator) |
Hydraulic system
Type of pump | fully oil-actuated, variable displacement piston pump and axial piston pump |
Overflow valve pressure | 2857 kPa and 20684.3 kPa |
Gear box
Transmission type | powershift transmission and HTE 840, Sequential direct drive gearbox with shifting under load Volvo |
Front Axle
General fluctuations | 19 degrees and 16 degrees |
Wheel tilt | 17.5 degrees and 18 degrees |
Dump
Lateral right shift | 685 mm and 673 mm |
Lowered blade pressure | 7790 kg and 9776 kg |
Mouldboard width | 2762 mm and 3657.6 mm |
Mouldboard height | 953 mm and 737 mm |
Left lateral displacement | 533 mm and 673 mm |
Circle
Diameter | 1753 mm and 1626 mm |
Rotating | 360 degrees and 360 degrees |
Images
Sizes
1. Dimensional length | 8521 mm | 1. Dimensional length | 9500 mm |
2. Between tyres width | 2540 mm | 2. Between tyres width | 2780 mm |
3. Height to cab upper part | 3340 mm | 3. Height to cab upper part | 3225 mm |
4. Wheelbase | 1538 mm | 4. Wheelbase | 6531 mm |
8. Blade base | 2642 mm | 8. Blade base | 2790 mm |