vs.

      John Deere 670B vs. Terex TG190TA-3

      6 reasons to buy John Deere 670B:

      Sizes

      Front part clearance 559 mm and 474 mm 15 % more or 85 mm

      Motor

      Displacement 6.8 l. and 6 l. 12 % more or 0.8 l.

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 4 and 3 25 % more or 1

      Front Axle

      Clearance 559 mm and 546 mm 2 % more or 13 mm

      Circle

      Maximum lifting above ground level 444 mm and 110 mm 75 % more or 334 mm

      12 reasons to buy Terex TG190TA-3:

      Operation

      Rear axle standard operating weight 13700 kg and 9256 kg 32 % more or 4444 kg
      Front axle standard operating weight 5000 kg and 3909 kg 22 % more or 1091 kg
      Fuel Capacity 480 l. and 265 l. 45 % more or 215 l.
      Cooling system fluid volume 42 l. and 26.5 l. 37 % more or 15.5 l.
      Hydraulic system fluid volume 170 l. and 53 l. 69 % more or 117 l.
      Circular gearbox fluid volume 6 l. and 2.8 l. 53 % more or 3.2 l.
      Each tandem case fluid volume 21 l. and 18.9 l. 10 % more or 2.1 l.
      Generator current strength 55 amperes and 42 amperes 24 % more or 13 amperes

      Motor

      Maximum power 131.2 kW and 100.7 kW 23 % more or 30.5 kW

      Hydraulic system

      Pump flow rate 99 l/min and 142 l/min 30 % less or 43 l/min

      Gear box

      Maximum reverse gear 19.4 km/h and 13.2 km/h 32 % more or 6.2 km/h
      Maximum forward speed 40 km/h and 39.3 km/h 2 % more or 0.7 km/h

      Neutral reasons:

      Sizes

      Height to cab upper part 3060 mm and 3300 mm
      Dimensional length 8310 mm and 10266 mm
      Between tyres width 2390 mm and 2490 mm
      Wheelbase 5970 mm and 6136 mm
      Dual axis wheelbase 1540 mm and 510 mm

      Operation

      Overall standard operating weight 13166 kg and 18700 kg
      Tyre size 13.00-25 and 14.00 -24TG
      Operating voltage 24 V and 24 V

      Motor

      Aspiration turbocharging and turbocharging, water cooling
      Manufacturer John Deere and Cummins

      Hydraulic system

      Type of pump variable displacement hydraulic pump and axial piston pump

      Gear box

      Transmission type powershift and powershift transmission with torque converter

      Front Axle

      Wheel tilt 20 degrees and 17 degrees
      General fluctuations 32 degrees and 15 degrees

      Dump

      Mouldboard width 3.7 mm and 3660 mm
      Mouldboard height 610 mm and 630 mm
      Mouldboard thickness 22 mm and 20 mm

      Circle

      Diameter 1520 mm and 1510 mm

      Images

      Sizes

      1. Dimensional length 8310 mm 1. Dimensional length 10266 mm
      2. Between tyres width 2390 mm 2. Between tyres width 2490 mm
      3. Height to cab upper part 3060 mm 3. Height to cab upper part 3300 mm
      4. Wheelbase 5970 mm 4. Wheelbase 6136 mm
      6. Front part clearance 559 mm 6. Front part clearance 474 mm
      7. Dual axis wheelbase 1540 mm 7. Dual axis wheelbase 510 mm