- Home/
- Comparison/
- Grader/
- John Deere 670C vs. Volvo G80
John Deere 670C vs. Volvo G80
13 reasons to buy John Deere 670C:
Operation
Rear differential/final drive fluid volume | 36 l. and 17 l. | 53 % more or 19 l. |
Each tandem case fluid volume | 75 l. and 68 l. | 9 % more or 7 l. |
Front axle standard operating weight | 3919 kg and 2270 kg | 42 % more or 1649 kg |
Rear axle standard operating weight | 9913 kg and 4530 kg | 54 % more or 5383 kg |
Fuel Capacity | 403 l. and 148 l. | 63 % more or 255 l. |
Cooling system fluid volume | 42 l. and 17 l. | 60 % more or 25 l. |
Motor
Effective speeds output 7-8 | 104.4 kW and 63.4 kW | 39 % more or 41.0 kW |
Maximum power | 104.4 kW and 63.4 kW | 39 % more or 41.0 kW |
Displacement | 6.8 l. and 3.9 l. | 43 % more or 2.9 l. |
Cylinders number | 6 and 4 | 33 % more or 2 |
Gear box
Maximum forward speed | 40.2 km/h and 32 km/h | 20 % more or 8.2 km/h |
Maximum reverse gear | 40.2 km/h and 32 km/h | 20 % more or 8.2 km/h |
Front Axle
Clearance | 610 mm and 406 mm | 33 % more or 204 mm |
4 reasons to buy Volvo G80:
Steerage
Turn radius | 5 m and 6.7 m | 25 % less or 1.7 m |
Operation
Hydraulic system fluid volume | 114 l. and 59 l. | 48 % more or 55 l. |
Motor
Power measured at | 2500 rev / min and 2000 rev / min | 20 % more or 500 rev |
Hydraulic system
Pump flow rate | 91 l/min and 173 l/min | 47 % less or 82 l/min |
Neutral reasons:
Sizes
Dimensional length | 8580 mm and 6350 mm |
Between tyres width | 2490 mm and 2362 mm |
Wheelbase | 5970 mm and 4674 mm |
Blade base | 2670 mm and 1880 mm |
Operation
Tyre size | 13.00-24 and 15X19.5, TL, G-2 |
Overall standard operating weight | 13832 kg and 6800 kg |
Motor
Manufacturer | John Deere and Cummins |
Model | 6068H and 4B3.9 |
Hydraulic system
Type of pump | variable displacement with locking in the middle position and single stream |
Overflow valve pressure | 17581.6 kPa and 12410.6 kPa |
Gear box
Transmission type | powershift and hydrostatic |
Front Axle
Wheel tilt | 20 degrees and 15 degrees |
General fluctuations | 32 degrees and 35 degrees |
Dump
Mouldboard height | 610 mm and 482.6 mm |
Mouldboard thickness | 22 mm and 15.9 mm |
Left lateral displacement | 683 mm and 1473.2 mm |
Mouldboard width | 3.7 mm and 3048 mm |
Lateral right shift | 683 mm and 1473.2 mm |
Circle
Diameter | 1520 mm and 990.6 mm |
Rotating | 360 degrees and 120 degrees |
Images
Sizes
8. Blade base | 2670 mm | 8. Blade base | 1880 mm |
1. Dimensional length | 8580 mm | 1. Dimensional length | 6350 mm |
2. Between tyres width | 2490 mm | 2. Between tyres width | 2362 mm |
4. Wheelbase | 5970 mm | 4. Wheelbase | 4674 mm |