- Home/
- Comparison/
- Grader/
- John Deere 670C vs. Volvo G960
John Deere 670C vs. Volvo G960
8 reasons to buy John Deere 670C:
Steerage
Turn radius | 6.7 m and 7265 m | 100 % less or 7258.3 m |
Operation
Oil system fluid volume | 24 l. and 21.5 l. | 10 % more or 2.5 l. |
Cooling system fluid volume | 42 l. and 34 l. | 19 % more or 8 l. |
Motor
Power measured at | 2000 rev / min and 1800 rev / min | 10 % more or 200 rev |
Hydraulic system
Pump flow rate | 173 l/min and 208 l/min | 17 % less or 35 l/min |
Gear box
Reverse gears number | 8 and 4 | 50 % more or 4 |
Maximum reverse gear | 40.2 km/h and 32 km/h | 20 % more or 8.2 km/h |
Circle
Blade tilt front angle | 49 degrees and 45 degrees | 8 % more or 4 degrees |
19 reasons to buy Volvo G960:
Operation
Transmission fluid volume | 61 l. and 38 l. | 38 % more or 23 l. |
Each tandem case fluid volume | 100 l. and 75 l. | 25 % more or 25 l. |
Front axle standard operating weight | 5100 kg and 3919 kg | 23 % more or 1181 kg |
Rear axle standard operating weight | 12450 kg and 9913 kg | 20 % more or 2537 kg |
Generator current strength | 80 amperes and 55 amperes | 31 % more or 25 amperes |
Front axle maximum operating weight | 7570 kg and 4427 kg | 42 % more or 3143 kg |
Rear axle maximum operating weight | 14290 kg and 11551 kg | 19 % more or 2739 kg |
Fuel Capacity | 404 l. and 403 l. | 0 % more or 1 l. |
Hydraulic system fluid volume | 91 l. and 59 l. | 35 % more or 32 l. |
Motor
Maximum power | 180.5 kW and 104.4 kW | 42 % more or 76.1 kW |
Effective speeds output 7-8 | 180.5 kW and 104.4 kW | 42 % more or 76.1 kW |
Effective drives torque 7-8 | 1073 Nm and 672.5 Nm | 37 % more or 400.5 Nm |
Displacement | 7.2 l. and 6.8 l. | 6 % more or 0.4 l. |
Torque measured at | 1500 rev / min and 1000 rev / min | 33 % more or 500 rev |
Gear box
Maximum forward speed | 45.4 km/h and 40.2 km/h | 11 % more or 5.2 km/h |
Dump
Blade pulling at maximum weight | 12861 kg and 10998.7 kg | 14 % more or 1862.3 kg |
Circle
Right maximum radius outside tyres | 2010 mm and 2110 mm | 5 % less or 100 mm |
Blade tilt rear angle | 6 degrees and 5 degrees | 17 % more or 1 degrees |
Maximum radius outside left tyres | 2020 mm and 2160 mm | 6 % less or 140 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 25 degrees and 23 degrees |
Sizes
Height to cab upper part | 3100 mm and 3225 mm |
Dimensional length | 8580 mm and 9150 mm |
Between tyres width | 2490 mm and 2537 mm |
Wheelbase | 5970 mm and 6280 mm |
Blade base | 2670 mm and 2650 mm |
Operation
Tyre size | 13.00-24 and 14:00 x 24, G-2 |
Operating voltage | 24 V and 24 V |
Overall standard operating weight | 13832 kg and 17550 kg |
Total maximum operating weight | 15977 kg and 21860 kg |
Motor
Cylinders number | 6 and 6 |
Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) and Turbocharging with subsequent air cooling (by a cooling radiator) |
Manufacturer | John Deere and Volvo |
Model | 6068H and D7E |
Hydraulic system
Type of pump | variable displacement with locking in the middle position and axial piston pump |
Overflow valve pressure | 17581.6 kPa and 20684.3 kPa |
Gear box
Transmission type | powershift and HTE 840, Sequential direct drive gearbox with shifting under load Volvo |
Forward gears number | 8 and 8 |
Front Axle
Clearance | 610 mm and 610 mm |
Wheel tilt | 20 degrees and 18 degrees |
General fluctuations | 32 degrees and 16 degrees |
Dump
Mouldboard width | 3.7 mm and 3657.6 mm |
Mouldboard height | 610 mm and 635 mm |
Mouldboard thickness | 22 mm and 22 mm |
Left lateral displacement | 683 mm and 673 mm |
Lateral right shift | 683 mm and 673 mm |
Circle
Diameter | 1520 mm and 1626 mm |
Rotating | 360 degrees and 360 degrees |
Left shift | 787 mm and 775 mm |
Right shift | 724 mm and 749 mm |
Images
Sizes
1. Dimensional length | 8580 mm | 1. Dimensional length | 9150 mm |
2. Between tyres width | 2490 mm | 2. Between tyres width | 2537 mm |
3. Height to cab upper part | 3100 mm | 3. Height to cab upper part | 3225 mm |
4. Wheelbase | 5970 mm | 4. Wheelbase | 6280 mm |
8. Blade base | 2670 mm | 8. Blade base | 2650 mm |