vs.

      John Deere 670CH vs. Mitsubishi MG230-E

      15 reasons to buy John Deere 670CH:

      Operation

      Transmission fluid volume 38 l. and 23 l. 39 % more or 15 l.
      Circular gearbox fluid volume 3.8 l. and 3.5 l. 8 % more or 0.3 l.
      Each tandem case fluid volume 75 l. and 28 l. 63 % more or 47 l.
      Generator current strength 55 amperes and 40 amperes 27 % more or 15 amperes
      Fuel Capacity 403 l. and 210 l. 48 % more or 193 l.
      Oil system fluid volume 24 l. and 16 l. 33 % more or 8 l.

      Motor

      Maximum power 138 kW and 85.8 kW 38 % more or 52.2 kW
      Displacement 6.8 l. and 5.9 l. 13 % more or 0.9 l.

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 8 and 6 25 % more or 2
      Maximum forward speed 40.2 km/h and 32.6 km/h 19 % more or 7.6 km/h
      Maximum reverse gear 40.2 km/h and 33.2 km/h 17 % more or 7.0 km/h

      Front Axle

      Clearance 610 mm and 480 mm 21 % more or 130 mm

      Circle

      Maximum lifting above ground level 444 mm and 430 mm 3 % more or 14 mm
      Blade tilt front angle 49 degrees and 40 degrees 18 % more or 9 degrees

      3 reasons to buy Mitsubishi MG230-E:

      Operation

      Hydraulic system fluid volume 110 l. and 59 l. 46 % more or 51 l.

      Motor

      Power measured at 2500 rev / min and 2000 rev / min 20 % more or 500 rev

      Hydraulic system

      Pump flow rate 110 l/min and 173 l/min 36 % less or 63 l/min

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 26 degrees

      Sizes

      Between tyres width 2460 mm and 2140 mm
      Height to cab upper part 3100 mm and 3030 mm
      Wheelbase 5970 mm and 5300 mm
      Dimensional length 8580 mm and 7325 mm
      Blade base 2670 mm and 2185 mm

      Operation

      Tyre size 13.00-24 and 13.00-24-12
      Operating voltage 24 V and 24 V
      Overall standard operating weight 13923 kg and 11060 kg

      Motor

      Manufacturer John Deere and Mitsubishi
      Model 6068H and 6D34-TE1
      Cylinders number 6 and 6

      Hydraulic system

      Overflow valve pressure 17581.6 kPa and 17.2 kPa
      Type of pump CLosed Center variable displacement piston pump and Pump with double gear

      Gear box

      Transmission type powershift and planetary gear

      Front Axle

      General fluctuations 32 degrees and 30 degrees
      Wheel tilt 20 degrees and 20 degrees

      Dump

      Mouldboard width 3.7 mm and 3100 mm
      Mouldboard height 610 mm and 610 mm
      Mouldboard thickness 22 mm and 19 mm

      Circle

      Rotating 360 degrees and 360 degrees
      Left shift 787 mm and 1650 mm
      Right shift 724 mm and 1680 mm
      Blade tilt rear angle 5 degrees and 5 degrees

      Images

      Sizes

      1. Dimensional length 8580 mm 1. Dimensional length 7325 mm
      2. Between tyres width 2460 mm 2. Between tyres width 2140 mm
      3. Height to cab upper part 3100 mm 3. Height to cab upper part 3030 mm
      4. Wheelbase 5970 mm 4. Wheelbase 5300 mm
      8. Blade base 2670 mm 8. Blade base 2185 mm