vs.

      John Deere 670CH vs. Volvo G970

      7 reasons to buy John Deere 670CH:

      Steerage

      Turn radius 6.7 m and 7700 m 100 % less or 7693.3 m

      Motor

      Power measured at 2000 rev / min and 1700 rev / min 15 % more or 300 rev

      Hydraulic system

      Pump flow rate 173 l/min and 208 l/min 17 % less or 35 l/min

      Gear box

      Reverse gears number 8 and 4 50 % more or 4
      Maximum reverse gear 40.2 km/h and 30.1 km/h 25 % more or 10.1 km/h

      Front Axle

      Clearance 610 mm and 590 mm 3 % more or 20 mm

      Circle

      Blade tilt front angle 49 degrees and 45 degrees 8 % more or 4 degrees

      21 reasons to buy Volvo G970:

      Operation

      Transmission fluid volume 61 l. and 38 l. 38 % more or 23 l.
      Front axle standard operating weight 5300 kg and 3919 kg 26 % more or 1381 kg
      Each tandem case fluid volume 100 l. and 75 l. 25 % more or 25 l.
      Generator current strength 80 amperes and 55 amperes 31 % more or 25 amperes
      Rear axle standard operating weight 13600 kg and 10004 kg 26 % more or 3596 kg
      Front axle maximum operating weight 8390 kg and 4427 kg 47 % more or 3963 kg
      Rear axle maximum operating weight 15470 kg and 11641 kg 25 % more or 3829 kg
      Fuel Capacity 498 l. and 403 l. 19 % more or 95 l.
      Oil system fluid volume 39 l. and 24 l. 38 % more or 15 l.
      Cooling system fluid volume 47 l. and 42 l. 11 % more or 5 l.
      Hydraulic system fluid volume 91 l. and 59 l. 35 % more or 32 l.

      Motor

      Torque measured at 1550 rev / min and 1000 rev / min 35 % more or 550 rev
      Effective speeds output 7-8 195.4 kW and 138 kW 29 % more or 57.4 kW
      Maximum power 195.4 kW and 138 kW 29 % more or 57.4 kW
      Effective drives torque 7-8 1188 Nm and 847.4 Nm 29 % more or 340.6 Nm
      Displacement 9.4 l. and 6.8 l. 28 % more or 2.6 l.

      Gear box

      Maximum forward speed 43.8 km/h and 40.2 km/h 8 % more or 3.6 km/h

      Dump

      Blade pulling at maximum weight 13923 kg and 11080.4 kg 20 % more or 2842.6 kg

      Circle

      Maximum radius outside left tyres 1970 mm and 2160 mm 9 % less or 190 mm
      Blade tilt rear angle 6 degrees and 5 degrees 17 % more or 1 degrees
      Right maximum radius outside tyres 1960 mm and 2110 mm 7 % less or 150 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 21 degrees

      Sizes

      Height to cab upper part 3100 mm and 3225 mm
      Dimensional length 8580 mm and 9500 mm
      Between tyres width 2460 mm and 2780 mm
      Blade base 2670 mm and 2790 mm
      Wheelbase 5970 mm and 6531 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size 13.00-24 and 14:00 x 24, G-2
      Overall standard operating weight 13923 kg and 18900 kg
      Total maximum operating weight 16068 kg and 22680 kg

      Motor

      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and Turbocharging with subsequent air cooling (by a cooling radiator)
      Manufacturer John Deere and Volvo
      Cylinders number 6 and 6
      Model 6068H and D9B

      Hydraulic system

      Overflow valve pressure 17581.6 kPa and 20684.3 kPa
      Type of pump CLosed Center variable displacement piston pump and axial piston pump

      Gear box

      Transmission type powershift and HTE 840, Sequential direct drive gearbox with shifting under load Volvo
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 20 degrees and 18 degrees
      General fluctuations 32 degrees and 16 degrees

      Dump

      Mouldboard width 3.7 mm and 3657.6 mm
      Mouldboard height 610 mm and 737 mm
      Mouldboard thickness 22 mm and 25 mm
      Left lateral displacement 683 mm and 673 mm
      Lateral right shift 683 mm and 673 mm

      Circle

      Right shift 724 mm and 749 mm
      Diameter 1520 mm and 1626 mm
      Rotating 360 degrees and 360 degrees
      Left shift 787 mm and 775 mm

      Images

      Sizes

      1. Dimensional length 8580 mm 1. Dimensional length 9500 mm
      2. Between tyres width 2460 mm 2. Between tyres width 2780 mm
      3. Height to cab upper part 3100 mm 3. Height to cab upper part 3225 mm
      4. Wheelbase 5970 mm 4. Wheelbase 6531 mm
      8. Blade base 2670 mm 8. Blade base 2790 mm