- Home/
- Comparison/
- Grader/
- John Deere 672A vs. John Deere JD670
John Deere 672A vs. John Deere JD670
8 reasons to buy John Deere 672A:
Operation
Each tandem case fluid volume | 18.9 l. and 15.1 l. | 20 % more or 3.8 l. |
Hydraulic system fluid volume | 143.8 l. and 106 l. | 26 % more or 37.8 l. |
Front axle standard operating weight | 3947 kg and 3471 kg | 12 % more or 476 kg |
Rear axle standard operating weight | 8460 kg and 8245 kg | 3 % more or 215 kg |
Front axle maximum operating weight | 4140 kg and 3615 kg | 13 % more or 525 kg |
Rear axle maximum operating weight | 9855 kg and 9741 kg | 1 % more or 114 kg |
Gear box
Maximum forward speed | 38.5 km/h and 38.4 km/h | 0 % more or 0.1 km/h |
Circle
Blade tilt front angle | 44 degrees and 35 degrees | 20 % more or 9 degrees |
5 reasons to buy John Deere JD670:
Steerage
Turn radius | 6.7 m and 6.9 m | 3 % less or 0.2 m |
Hydraulic system
Pump flow rate | 132 l/min and 142.3 l/min | 7 % less or 10.3 l/min |
Gear box
Maximum reverse gear | 12.3 km/h and 12.2 km/h | 1 % more or 0.1 km/h |
Circle
Maximum radius outside left tyres | 2130 mm and 2220 mm | 4 % less or 90 mm |
Right maximum radius outside tyres | 2130 mm and 2150 mm | 1 % less or 20 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 25 degrees and 25 degrees |
Sizes
Height to cab upper part | 3200 mm and 3200 mm |
Dimensional length | 8310 mm and 8310 mm |
Between tyres width | 2390 mm and 2340 mm |
Wheelbase | 5970 mm and 5970 mm |
Blade base | 2540 mm and 2540 mm |
Dual axis wheelbase | 1540 mm and 1540 mm |
Front part clearance | 559 mm and 559 mm |
Operation
Oil system fluid volume | 18.9 l. and 18.9 l. |
Circular gearbox fluid volume | 2.8 l. and 2.8 l. |
Cooling system fluid volume | 26.5 l. and 26.5 l. |
Tyre size | 13.00-24 and 13.00-24 |
Operating voltage | 25 V and 24 V |
Overall standard operating weight | 12407 kg and 11716 kg |
Total maximum operating weight | 13995 kg and 13356 kg |
Fuel Capacity | 227 l. and 227 l. |
Motor
Cylinders number | 6 and 6 |
Effective speeds output 7-8 | 93.2 kW and 93.2 kW |
Power measured at | 2300 rev / min and 2300 rev / min |
Maximum power | 93.2 kW and 93.2 kW |
Torque measured at | 1300 rev / min and 1300 rev / min |
Effective drives torque 7-8 | 504.4 Nm and 504.4 Nm |
Displacement | 6.8 l. and 6.8 l. |
Aspiration | turbocharging and turbocharging |
Manufacturer | John Deere and John Deere |
Hydraulic system
Type of pump | variable displacement with locking in the middle position and Variable displacement with locking in the middle position |
Gear box
Transmission type | powershift transmission and powershift |
Forward gears number | 8 and 8 |
Reverse gears number | 4 and 4 |
Front Axle
General fluctuations | 30 degrees and 30 degrees |
Clearance | 559 mm and 559 mm |
Wheel tilt | 20 degrees and 20 degrees |
Dump
Mouldboard width | 3.7 mm and 3.7 mm |
Mouldboard height | 610 mm and 610 mm |
Mouldboard thickness | 22 mm and 22 mm |
Left lateral displacement | 683 mm and 683 mm |
Lateral right shift | 683 mm and 683 mm |
Circle
Maximum lifting above ground level | 409 mm and 409 mm |
Diameter | 1.5 mm and 1470 mm |
Rotating | 360 degrees and 360 degrees |
Images
Sizes
3. Height to cab upper part | 3200 mm | 3. Height to cab upper part | 3200 mm |
4. Wheelbase | 5970 mm | 4. Wheelbase | 5970 mm |
6. Front part clearance | 559 mm | 6. Front part clearance | 559 mm |
7. Dual axis wheelbase | 1540 mm | 7. Dual axis wheelbase | 1540 mm |
8. Blade base | 2540 mm | 8. Blade base | 2540 mm |
1. Dimensional length | 8310 mm | 1. Dimensional length | 8310 mm |
2. Between tyres width | 2390 mm | 2. Between tyres width | 2340 mm |