- Home/
- Comparison/
- Grader/
- John Deere 672D vs. Caterpillar 143H
John Deere 672D vs. Caterpillar 143H
8 reasons to buy John Deere 672D:
Steerage
Turn radius | 7.2 m and 7.5 m | 4 % less or 0.3 m |
Operation
Front axle standard operating weight | 4358 kg and 4305 kg | 1 % more or 53 kg |
Fuel Capacity | 401.2 l. and 397 l. | 1 % more or 4.2 l. |
Cooling system fluid volume | 45.4 l. and 38 l. | 16 % more or 7.4 l. |
Each tandem case fluid volume | 75.7 l. and 64 l. | 15 % more or 11.7 l. |
Gear box
Maximum reverse gear | 40 km/h and 34.7 km/h | 13 % more or 5.3 km/h |
Reverse gears number | 8 and 6 | 25 % more or 2 |
Circle
Blade tilt front angle | 42 degrees and 40 degrees | 5 % more or 2 degrees |
15 reasons to buy Caterpillar 143H:
Sizes
Front part clearance | 600 mm and 587 mm | 2 % more or 13 mm |
Operation
Rear axle standard operating weight | 10965 kg and 10895 kg | 1 % more or 70 kg |
Hydraulic system fluid volume | 80 l. and 53 l. | 34 % more or 27 l. |
Circular gearbox fluid volume | 7 l. and 5.7 l. | 19 % more or 1.3 l. |
Motor
Displacement | 10.3 l. and 6.8 l. | 34 % more or 3.5 l. |
Effective speeds output 3-4 | 138 kW and 123 kW | 11 % more or 15 kW |
Effective speeds output 7-8 | 152.9 kW and 138 kW | 10 % more or 14.9 kW |
Maximum power | 152.9 kW and 138 kW | 10 % more or 14.9 kW |
Hydraulic system
Pump flow rate | 206 l/min and 207 l/min | 0 % less or 1 l/min |
Gear box
Maximum forward speed | 44 km/h and 40 km/h | 9 % more or 4 km/h |
Front Axle
Clearance | 600 mm and 587 mm | 2 % more or 13 mm |
Dump
Blade pulling at maximum weight | 19931 kg and 19105 kg | 4 % more or 826 kg |
Circle
Maximum lifting above ground level | 480 mm and 470 mm | 2 % more or 10 mm |
Maximum radius outside left tyres | 1896 mm and 2100 mm | 10 % less or 204 mm |
Right maximum radius outside tyres | 1978 mm and 2080 mm | 5 % less or 102 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 22 degrees and 20 degrees |
Sizes
Height to cab upper part | 3180 mm and 3131 mm |
Dimensional length | 8804 mm and 8713 mm |
Between tyres width | 2490 mm and 2553 mm |
Wheelbase | 6120 mm and 6169 mm |
Blade base | 2568 mm and 2561 mm |
Dual axis wheelbase | 1540 mm and 1523 mm |
Operation
Overall standard operating weight | 15254 kg and 15270 kg |
Total maximum operating weight | 21228 kg and 22146 kg |
Motor
Manufacturer | John Deere and Caterpillar |
Model | 6068H and 3176C DITA ATAAC VHP |
Effective speeds output 1-2 | 123 kW and 123 kW |
Effective speeds output 5-6 | 138 kW and 138 kW |
Hydraulic system
Type of pump | variable displacement piston pump and axial piston |
Overflow valve pressure | 18960.6 kPa and 24150 kPa |
Gear box
Transmission type | Powershift transmission with direct drive and powershift transmission with direct drive |
Forward gears number | 8 and 8 |
Front Axle
Wheel tilt | 20 degrees and 18 degrees |
General fluctuations | 32 degrees and 32 degrees |
Dump
Mouldboard width | 3660 mm and 3658 mm |
Mouldboard height | 610 mm and 610 mm |
Mouldboard thickness | 22 mm and 22 mm |
Left lateral displacement | 680 mm and 524 mm |
Lateral right shift | 680 mm and 660 mm |
Circle
Diameter | 1520 mm and 1530 mm |
Left shift | 787 mm and 695 mm |
Right shift | 724 mm and 728 mm |
Blade tilt rear angle | 5 degrees and 5 degrees |
Images
Sizes
6. Front part clearance | 587 mm | 6. Front part clearance | 600 mm |
7. Dual axis wheelbase | 1540 mm | 7. Dual axis wheelbase | 1523 mm |
8. Blade base | 2568 mm | 8. Blade base | 2561 mm |
1. Dimensional length | 8804 mm | 1. Dimensional length | 8713 mm |
2. Between tyres width | 2490 mm | 2. Between tyres width | 2553 mm |
3. Height to cab upper part | 3180 mm | 3. Height to cab upper part | 3131 mm |
4. Wheelbase | 6120 mm | 4. Wheelbase | 6169 mm |