- Home/
- Comparison/
- Grader/
- John Deere 770AH vs. Volvo G60
John Deere 770AH vs. Volvo G60
10 reasons to buy John Deere 770AH:
Operation
Front axle standard operating weight | 3877.3 kg and 1760 kg | 55 % more or 2117.3 kg |
Rear axle standard operating weight | 9848.4 kg and 4050 kg | 59 % more or 5798.4 kg |
Fuel Capacity | 265 l. and 148 l. | 44 % more or 117 l. |
Cooling system fluid volume | 26.5 l. and 17 l. | 36 % more or 9.5 l. |
Hydraulic system fluid volume | 117.3 l. and 114 l. | 3 % more or 3.3 l. |
Motor
Effective speeds output 1-2 | 115.6 kW and 63.4 kW | 45 % more or 52.2 kW |
Effective speeds output 7-8 | 134.2 kW and 63.4 kW | 53 % more or 70.8 kW |
Maximum power | 134.2 kW and 63.4 kW | 53 % more or 70.8 kW |
Displacement | 7.6 l. and 3.9 l. | 49 % more or 3.7 l. |
Gear box
Maximum forward speed | 40.4 km/h and 16.1 km/h | 60 % more or 24.3 km/h |
4 reasons to buy Volvo G60:
Steerage
Turn radius | 5 m and 6.7 m | 25 % less or 1.7 m |
Motor
Power measured at | 2500 rev / min and 2200 rev / min | 12 % more or 300 rev |
Hydraulic system
Pump flow rate | 61 l/min and 136.3 l/min | 55 % less or 75.3 l/min |
Gear box
Maximum reverse gear | 32.2 km/h and 13.8 km/h | 57 % more or 18.4 km/h |
Neutral reasons:
Steerage
Left and right hinge connection | 25 degrees and 37 degrees |
Sizes
Height to cab upper part | 3200 mm and 2896 mm |
Dimensional length | 8470 mm and 6350 mm |
Between tyres width | 2440 mm and 2184 mm |
Wheelbase | 5970 mm and 4674 mm |
Blade base | 2720 mm and 1880 mm |
Operation
Overall standard operating weight | 13725.7 kg and 5810 kg |
Motor
Manufacturer | John Deere and Cummins |
Model | 6-466A and 4B3.9 |
Hydraulic system
Type of pump | Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume and single stream |
Gear box
Transmission type | powershift and hydrostatic |
Dump
Mouldboard thickness | 22.4 mm and 15.9 mm |
Left lateral displacement | 683 mm and 1168.4 mm |
Lateral right shift | 683 mm and 1168.4 mm |
Mouldboard width | 3657.6 mm and 3048 mm |
Mouldboard height | 609.6 mm and 482.6 mm |
Images
Sizes
4. Wheelbase | 5970 mm | 4. Wheelbase | 4674 mm |
8. Blade base | 2720 mm | 8. Blade base | 1880 mm |
1. Dimensional length | 8470 mm | 1. Dimensional length | 6350 mm |
2. Between tyres width | 2440 mm | 2. Between tyres width | 2184 mm |
3. Height to cab upper part | 3200 mm | 3. Height to cab upper part | 2896 mm |