- Home/
- Comparison/
- Grader/
- John Deere 770CH vs. New Holland F106.6
John Deere 770CH vs. New Holland F106.6
20 reasons to buy John Deere 770CH:
Steerage
Turn radius | 6.7 m and 7250 m | 100 % less or 7243.3 m |
Sizes
Front part clearance | 638 mm and 136 mm | 79 % more or 502 mm |
Operation
Front axle maximum operating weight | 4495.1 kg and 3800 kg | 15 % more or 695.1 kg |
Rear axle maximum operating weight | 11938.6 kg and 8200 kg | 31 % more or 3738.6 kg |
Transmission fluid volume | 38 l. and 21 l. | 45 % more or 17 l. |
Each tandem case fluid volume | 75 l. and 74 l. | 1 % more or 1 l. |
Oil system fluid volume | 29 l. and 12.5 l. | 57 % more or 16.5 l. |
Fuel Capacity | 401.3 l. and 189 l. | 53 % more or 212.3 l. |
Front axle standard operating weight | 3987.1 kg and 2905 kg | 27 % more or 1082.1 kg |
Rear axle standard operating weight | 10301.1 kg and 7425 kg | 28 % more or 2876.1 kg |
Motor
Effective speeds output 5-6 | 152.9 kW and 100.7 kW | 34 % more or 52.2 kW |
Maximum power | 152.9 kW and 100.7 kW | 34 % more or 52.2 kW |
Displacement | 8.1 l. and 5.9 l. | 27 % more or 2.2 l. |
Gear box
Reverse gears number | 8 and 3 | 62 % more or 5 |
Maximum forward speed | 41.5 km/h and 37.8 km/h | 9 % more or 3.7 km/h |
Maximum reverse gear | 41.5 km/h and 27.9 km/h | 33 % more or 13.6 km/h |
Forward gears number | 8 and 6 | 25 % more or 2 |
Front Axle
Clearance | 638 mm and 485 mm | 24 % more or 153 mm |
Circle
Right maximum radius outside tyres | 2110 mm and 2490 mm | 15 % less or 380 mm |
Maximum lifting above ground level | 470 mm and 400 mm | 15 % more or 70 mm |
5 reasons to buy New Holland F106.6:
Operation
Hydraulic system fluid volume | 170 l. and 59 l. | 65 % more or 111 l. |
Generator current strength | 70 amperes and 55 amperes | 21 % more or 15 amperes |
Motor
Power measured at | 2100 rev / min and 1900 rev / min | 10 % more or 200 rev |
Hydraulic system
Pump flow rate | 95 l/min and 207.1 l/min | 54 % less or 112.1 l/min |
Circle
Maximum radius outside left tyres | 2150 mm and 2160 mm | 0 % less or 10 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 25 degrees and 28 degrees |
Sizes
Dimensional length | 8610 mm and 8888 mm |
Between tyres width | 2510 mm and 2307 mm |
Wheelbase | 5970 mm and 5243 mm |
Blade base | 2670 mm and 1981 mm |
Dual axis wheelbase | 1540 mm and 1250 mm |
Height to cab upper part | 3120 mm and 3184 mm |
Operation
Total maximum operating weight | 16433.7 kg and 11500 kg |
Tyre size | 14.00-24 and 405/70R20 |
Operating voltage | 24 V and 24 V |
Overall standard operating weight | 14288.2 kg and 10330 kg |
Motor
Cylinders number | 6 and 6 |
Model | 6081H and CNH 4-stroke cycle, naturally aspirated diesel engine |
Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging, water cooling |
Hydraulic system
Type of pump | variable displacement with locking in the middle position and Axial cam pump, variable displacement piston pump |
Overflow valve pressure | 17581.6 kPa and 20000 kPa |
Gear box
Transmission type | powershift and powershift transmission |
Front Axle
Wheel tilt | 20 degrees and 22 degrees |
General fluctuations | 32 degrees and 15 degrees |
Dump
Mouldboard width | 3657.6 mm and 3355 mm |
Mouldboard height | 609.6 mm and 152 mm |
Mouldboard thickness | 22.4 mm and 19 mm |
Left lateral displacement | 683 mm and 700 mm |
Lateral right shift | 683 mm and 500 mm |
Circle
Rotating | 360 degrees and degrees |
Left shift | 787 mm and 700 mm |
Right shift | 724 mm and 500 mm |
Images
Sizes
8. Blade base | 2670 mm | 8. Blade base | 1981 mm |
1. Dimensional length | 8610 mm | 1. Dimensional length | 8888 mm |
2. Between tyres width | 2510 mm | 2. Between tyres width | 2307 mm |
3. Height to cab upper part | 3120 mm | 3. Height to cab upper part | 3184 mm |
4. Wheelbase | 5970 mm | 4. Wheelbase | 5243 mm |
6. Front part clearance | 638 mm | 6. Front part clearance | 136 mm |
7. Dual axis wheelbase | 1540 mm | 7. Dual axis wheelbase | 1250 mm |