vs.

      John Deere 770CH vs. New Holland RG170.B

      22 reasons to buy John Deere 770CH:

      Steerage

      Turn radius 6.7 m and 7289 m 100 % less or 7282.3 m

      Operation

      Transmission fluid volume 38 l. and 28.5 l. 25 % more or 9.5 l.
      Rear differential/final drive fluid volume 36 l. and 29 l. 19 % more or 7 l.
      Fuel Capacity 401.3 l. and 341 l. 15 % more or 60.3 l.
      Circular gearbox fluid volume 3.8 l. and 2.8 l. 26 % more or 1.0 l.
      Each tandem case fluid volume 75 l. and 22.7 l. 70 % more or 52.3 l.
      Cooling system fluid volume 45.4 l. and 40 l. 12 % more or 5.4 l.
      Rear axle standard operating weight 10301.1 kg and 10300 kg 0 % more or 1.1 kg

      Motor

      Effective speeds output 5-6 152.9 kW and 149.1 kW 2 % more or 3.8 kW
      Effective speeds output 7-8 152.9 kW and 149.1 kW 2 % more or 3.8 kW
      Maximum power 152.9 kW and 149.1 kW 2 % more or 3.8 kW
      Effective drives torque 1-2 772.8 Nm and 695.5 Nm 10 % more or 77.3 Nm
      Effective drives torque 3-4 922 Nm and 862.3 Nm 6 % more or 59.7 Nm
      Effective drives torque 5-6 924.7 Nm and 862.3 Nm 7 % more or 62.4 Nm
      Effective drives torque 7-8 924.7 Nm and 862.3 Nm 7 % more or 62.4 Nm
      Displacement 8.1 l. and 5.9 l. 27 % more or 2.2 l.

      Gear box

      Reverse gears number 8 and 4 50 % more or 4
      Maximum reverse gear 41.5 km/h and 30 km/h 28 % more or 11.5 km/h

      Front Axle

      Clearance 638 mm and 622 mm 3 % more or 16 mm

      Circle

      Maximum lifting above ground level 470 mm and 445 mm 5 % more or 25 mm
      Blade tilt front angle 49 degrees and 42 degrees 14 % more or 7 degrees
      Right maximum radius outside tyres 2110 mm and 2174 mm 3 % less or 64 mm

      9 reasons to buy New Holland RG170.B:

      Operation

      Hydraulic system fluid volume 180 l. and 59 l. 67 % more or 121 l.
      Generator current strength 70 amperes and 55 amperes 21 % more or 15 amperes
      Front axle standard operating weight 4250 kg and 3987.1 kg 6 % more or 262.9 kg

      Motor

      Effective speeds output 3-4 149.1 kW and 138 kW 7 % more or 11.1 kW
      Effective speeds output 1-2 126.8 kW and 123 kW 3 % more or 3.8 kW

      Hydraulic system

      Pump flow rate 185.5 l/min and 207.1 l/min 10 % less or 21.6 l/min

      Gear box

      Maximum forward speed 42.9 km/h and 41.5 km/h 3 % more or 1.4 km/h

      Circle

      Blade tilt rear angle 90 degrees and 5 degrees 94 % more or 85 degrees
      Maximum radius outside left tyres 1978 mm and 2160 mm 8 % less or 182 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 25 degrees

      Sizes

      Height to cab upper part 3120 mm and 3140 mm
      Dimensional length 8610 mm and 9309 mm
      Between tyres width 2510 mm and 2512 mm
      Dual axis wheelbase 1540 mm and 1594 mm
      Wheelbase 5970 mm and 6219 mm
      Blade base 2670 mm and 2562 mm

      Operation

      Tyre size 14.00-24 and Fireston 14 x 24 10 layers 9" 1-pc. rim
      Operating voltage 24 V and 24 V
      Overall standard operating weight 14288.2 kg and 14550 kg

      Motor

      Manufacturer John Deere and Cummins
      Model 6081H and QSB 5.9
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging

      Hydraulic system

      Type of pump variable displacement with locking in the middle position and variable displacement piston pump with load sensing
      Overflow valve pressure 17581.6 kPa and 19305.3 kPa

      Gear box

      Transmission type powershift and powershift transmission with direct drive
      Forward gears number 8 and 8

      Front Axle

      General fluctuations 32 degrees and 20 degrees
      Wheel tilt 20 degrees and 48 degrees

      Dump

      Mouldboard width 3657.6 mm and 3658 mm
      Mouldboard height 609.6 mm and 622 mm
      Mouldboard thickness 22.4 mm and 22 mm
      Left lateral displacement 683 mm and 533 mm
      Lateral right shift 683 mm and 686 mm

      Circle

      Diameter 1520 mm and 1753 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      8. Blade base 2670 mm 8. Blade base 2562 mm
      1. Dimensional length 8610 mm 1. Dimensional length 9309 mm
      2. Between tyres width 2510 mm 2. Between tyres width 2512 mm
      3. Height to cab upper part 3120 mm 3. Height to cab upper part 3140 mm
      4. Wheelbase 5970 mm 4. Wheelbase 6219 mm
      7. Dual axis wheelbase 1540 mm 7. Dual axis wheelbase 1594 mm