vs.

      John Deere 770CH vs. Volvo G780

      10 reasons to buy John Deere 770CH:

      Operation

      Rear differential/final drive fluid volume 36 l. and 34 l. 6 % more or 2 l.
      Fuel Capacity 401.3 l. and 378.5 l. 6 % more or 22.8 l.

      Gear box

      Maximum reverse gear 41.5 km/h and 27.4 km/h 34 % more or 14.1 km/h
      Reverse gears number 8 and 4 50 % more or 4
      Maximum forward speed 41.5 km/h and 38.3 km/h 8 % more or 3.2 km/h

      Dump

      Blade pulling at maximum weight 12696.1 kg and 12023.4 kg 5 % more or 672.7 kg

      Circle

      Maximum radius outside left tyres 2160 mm and 2311.4 mm 7 % less or 151.4 mm
      Right maximum radius outside tyres 2110 mm and 2298.7 mm 8 % less or 188.7 mm
      Maximum lifting above ground level 470 mm and 431.8 mm 8 % more or 38.2 mm
      Blade tilt front angle 49 degrees and 46 degrees 6 % more or 3 degrees

      15 reasons to buy Volvo G780:

      Operation

      Hydraulic system fluid volume 90 l. and 59 l. 34 % more or 31 l.
      Each tandem case fluid volume 105 l. and 75 l. 29 % more or 30 l.
      Front axle standard operating weight 6028 kg and 3987.1 kg 34 % more or 2040.9 kg
      Rear axle standard operating weight 13360 kg and 10301.1 kg 23 % more or 3058.9 kg
      Generator current strength 75 amperes and 55 amperes 27 % more or 20 amperes
      Cooling system fluid volume 50 l. and 45.4 l. 9 % more or 4.6 l.

      Motor

      Maximum power 156.6 kW and 152.9 kW 2 % more or 3.7 kW
      Effective speeds output 7-8 156.6 kW and 152.9 kW 2 % more or 3.7 kW
      Effective drives torque 7-8 1030.4 Nm and 924.7 Nm 10 % more or 105.7 Nm
      Displacement 10.8 l. and 8.1 l. 25 % more or 2.7 l.
      Power measured at 2100 rev / min and 1900 rev / min 10 % more or 200 rev
      Torque measured at 1300 rev / min and 900 rev / min 31 % more or 400 rev

      Hydraulic system

      Pump flow rate 183 l/min and 207.1 l/min 12 % less or 24.1 l/min

      Front Axle

      Clearance 698 mm and 638 mm 9 % more or 60 mm

      Circle

      Blade tilt rear angle 13 degrees and 5 degrees 62 % more or 8 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 22 degrees

      Sizes

      Height to cab upper part 3120 mm and 3200 mm
      Dimensional length 8610 mm and 8687 mm
      Between tyres width 2510 mm and 2794 mm
      Wheelbase 5970 mm and 6248 mm
      Blade base 2670 mm and 2718 mm

      Operation

      Transmission fluid volume 38 l. and 38 l.
      Tyre size 14.00-24 and 16.00 x 24, G-2
      Operating voltage 24 V and 24 V
      Overall standard operating weight 14288.2 kg and 19388 kg

      Motor

      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging
      Manufacturer John Deere and Cummins
      Model 6081H and M11

      Hydraulic system

      Type of pump variable displacement with locking in the middle position and hydraulic system with load sensing
      Overflow valve pressure 17581.6 kPa and 17236.9 kPa

      Gear box

      Transmission type powershift and powershift transmission
      Forward gears number 8 and 8

      Front Axle

      General fluctuations 32 degrees and 16 degrees
      Wheel tilt 20 degrees and 18 degrees

      Dump

      Mouldboard width 3657.6 mm and 4267.2 mm
      Mouldboard height 609.6 mm and 787.4 mm
      Mouldboard thickness 22.4 mm and 25.4 mm
      Left lateral displacement 683 mm and 673.1 mm
      Lateral right shift 683 mm and 673.1 mm

      Circle

      Diameter 1520 mm and 1692 mm
      Rotating 360 degrees and 360 degrees
      Left shift 787 mm and 762 mm
      Right shift 724 mm and 749.3 mm

      Images

      Sizes

      1. Dimensional length 8610 mm 1. Dimensional length 8687 mm
      2. Between tyres width 2510 mm 2. Between tyres width 2794 mm
      3. Height to cab upper part 3120 mm 3. Height to cab upper part 3200 mm
      4. Wheelbase 5970 mm 4. Wheelbase 6248 mm
      8. Blade base 2670 mm 8. Blade base 2718 mm