vs.

      John Deere 772AH vs. Caterpillar 160M2

      7 reasons to buy John Deere 772AH:

      Steerage

      Turn radius 6.9 m and 7.8 m 12 % less or 0.9 m

      Operation

      Hydraulic system fluid volume 155.2 l. and 99.9 l. 36 % more or 55.3 l.

      Motor

      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev

      Hydraulic system

      Pump flow rate 136.3 l/min and 210.1 l/min 35 % less or 73.8 l/min

      Circle

      Right maximum radius outside tyres 2250 mm and 2278 mm 1 % less or 28 mm
      Blade tilt front angle 44 degrees and 40 degrees 9 % more or 4 degrees
      Blade tilt rear angle 10 degrees and 5 degrees 50 % more or 5 degrees

      20 reasons to buy Caterpillar 160M2:

      Sizes

      Front part clearance 600 mm and 572 mm 5 % more or 28 mm

      Operation

      Front axle maximum operating weight 6052.3 kg and 4436.1 kg 27 % more or 1616.2 kg
      Generator current strength 150 amperes and 42 amperes 72 % more or 108 amperes
      Rear axle maximum operating weight 16530.7 kg and 11209.2 kg 32 % more or 5321.5 kg
      Front axle standard operating weight 4236.1 kg and 4189.8 kg 1 % more or 46.3 kg
      Rear axle standard operating weight 13059.8 kg and 9827.5 kg 25 % more or 3232.3 kg
      Fuel Capacity 416.4 l. and 265 l. 36 % more or 151.4 l.
      Oil system fluid volume 29.9 l. and 18.9 l. 37 % more or 11.0 l.
      Cooling system fluid volume 56 l. and 26.5 l. 53 % more or 29.5 l.
      Circular gearbox fluid volume 6.8 l. and 3.8 l. 44 % more or 3.0 l.
      Each tandem case fluid volume 64 l. and 18.9 l. 70 % more or 45.1 l.

      Motor

      Effective drives torque 7-8 1355.8 Nm and 728.1 Nm 46 % more or 627.7 Nm
      Torque measured at 2100 rev / min and 1400 rev / min 33 % more or 700 rev
      Effective speeds output 7-8 181.2 kW and 134.2 kW 26 % more or 47.0 kW

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum forward speed 46.7 km/h and 40.4 km/h 13 % more or 6.3 km/h
      Maximum reverse gear 36.9 km/h and 13.8 km/h 63 % more or 23.1 km/h

      Front Axle

      Clearance 600 mm and 572 mm 5 % more or 28 mm

      Circle

      Maximum radius outside left tyres 2090 mm and 2280 mm 8 % less or 190 mm
      Maximum lifting above ground level 452 mm and 432 mm 4 % more or 20 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 20 degrees

      Sizes

      Blade base 2720 mm and 2557 mm
      Dual axis wheelbase 1540 mm and 1523 mm
      Height to cab upper part 3200 mm and 3287 mm
      Dimensional length 8470 mm and 8898 mm
      Between tyres width 2440 mm and 2581 mm
      Wheelbase 5970 mm and 6126 mm

      Operation

      Operating voltage 24 V and 24 V
      Total maximum operating weight 15645.3 kg and 23947.4 kg
      Overall standard operating weight 14017.4 kg and 17295.9 kg

      Motor

      Manufacturer John Deere and Caterpillar
      Cylinders number 6 and 6
      Model 6-466A and C9.3 ACERT VHP

      Hydraulic system

      Type of pump Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume and variable displacement piston pump

      Gear box

      Transmission type powershift and Powershift transmission with direct drive
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 20 degrees and 18 degrees
      General fluctuations 30 degrees and 32 degrees

      Dump

      Mouldboard thickness 22.4 mm and 22 mm
      Left lateral displacement 683 mm and 510 mm
      Lateral right shift 683 mm and 660 mm
      Mouldboard width 3657.6 mm and 4267.2 mm
      Mouldboard height 609.6 mm and 609.6 mm

      Circle

      Rotating 360 degrees and 360 degrees
      Left shift 851 mm and 695 mm
      Right shift 813 mm and 728 mm
      Diameter 1500 mm and 1530 mm

      Images

      Sizes

      3. Height to cab upper part 3200 mm 3. Height to cab upper part 3287 mm
      4. Wheelbase 5970 mm 4. Wheelbase 6126 mm
      6. Front part clearance 572 mm 6. Front part clearance 600 mm
      7. Dual axis wheelbase 1540 mm 7. Dual axis wheelbase 1523 mm
      8. Blade base 2720 mm 8. Blade base 2557 mm
      1. Dimensional length 8470 mm 1. Dimensional length 8898 mm
      2. Between tyres width 2440 mm 2. Between tyres width 2581 mm