- Home/
- Comparison/
- Grader/
- John Deere 772B vs. Caterpillar 12G
John Deere 772B vs. Caterpillar 12G
11 reasons to buy John Deere 772B:
Steerage
Turn radius | 6.9 m and 7.3 m | 5 % less or 0.4 m |
Operation
Generator current strength | 42 amperes and 19 amperes | 55 % more or 23 amperes |
Front axle standard operating weight | 4263.8 kg and 3570 kg | 16 % more or 693.8 kg |
Rear axle standard operating weight | 10455.3 kg and 9130 kg | 13 % more or 1325.3 kg |
Front axle maximum operating weight | 4830.8 kg and 4530 kg | 6 % more or 300.8 kg |
Rear axle maximum operating weight | 11829.7 kg and 9800 kg | 17 % more or 2029.7 kg |
Fuel Capacity | 340.7 l. and 283 l. | 17 % more or 57.7 l. |
Hydraulic system fluid volume | 87.1 l. and 76 l. | 13 % more or 11.1 l. |
Motor
Maximum power | 115.6 kW and 100.7 kW | 13 % more or 14.9 kW |
Gear box
Forward gears number | 8 and 6 | 25 % more or 2 |
Circle
Maximum lifting above ground level | 470 mm and 438 mm | 7 % more or 32 mm |
13 reasons to buy Caterpillar 12G:
Operation
Each tandem case fluid volume | 64 l. and 18.9 l. | 70 % more or 45.1 l. |
Oil system fluid volume | 29 l. and 24.6 l. | 15 % more or 4.4 l. |
Cooling system fluid volume | 47 l. and 26.5 l. | 44 % more or 20.5 l. |
Motor
Displacement | 10.5 l. and 7.6 l. | 28 % more or 2.9 l. |
Hydraulic system
Pump flow rate | 193 l/min and 198.4 l/min | 3 % less or 5.4 l/min |
Gear box
Reverse gears number | 6 and 4 | 33 % more or 2 |
Maximum forward speed | 41 km/h and 40.6 km/h | 1 % more or 0.4 km/h |
Maximum reverse gear | 41 km/h and 13.8 km/h | 66 % more or 27.2 km/h |
Front Axle
Clearance | 610 mm and 572 mm | 6 % more or 38 mm |
Circle
Blade tilt rear angle | 90 degrees and 5 degrees | 94 % more or 85 degrees |
Right maximum radius outside tyres | 1870 mm and 2110 mm | 11 % less or 240 mm |
Blade tilt front angle | 90 degrees and 49 degrees | 46 % more or 41 degrees |
Maximum radius outside left tyres | 1830 mm and 2160 mm | 15 % less or 330 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 25 degrees and 50 degrees |
Sizes
Height to cab upper part | 3090 mm and 3330 mm |
Dimensional length | 8510 mm and 8310 mm |
Between tyres width | 2440 mm and 2410 mm |
Wheelbase | 5970 mm and 5920 mm |
Blade base | 2670 mm and 2570 mm |
Dual axis wheelbase | 1540 mm and 1520 mm |
Operation
Operating voltage | 24 V and 24 V |
Overall standard operating weight | 14719.1 kg and 12700 kg |
Total maximum operating weight | 16660.4 kg and 14330 kg |
Motor
Cylinders number | 6 and 6 |
Power measured at | 2200 rev / min and 2200 rev / min |
Manufacturer | John Deere and Caterpillar |
Hydraulic system
Type of pump | Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume and Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume |
Gear box
Transmission type | powershift and Powershift transmission with direct drive |
Front Axle
Wheel tilt | 20 degrees and 18 degrees |
General fluctuations | 32 degrees and 32 degrees |
Dump
Mouldboard width | 3657.6 mm and 3650 mm |
Mouldboard height | 609.6 mm and 610 mm |
Mouldboard thickness | 22.4 mm and 22 mm |
Left lateral displacement | 683 mm and 670 mm |
Lateral right shift | 683 mm and 520 mm |
Circle
Diameter | 1520 mm and 1530 mm |
Rotating | 360 degrees and 360 degrees |
Images
Sizes
3. Height to cab upper part | 3090 mm | 3. Height to cab upper part | 3330 mm |
4. Wheelbase | 5970 mm | 4. Wheelbase | 5920 mm |
7. Dual axis wheelbase | 1540 mm | 7. Dual axis wheelbase | 1520 mm |
8. Blade base | 2670 mm | 8. Blade base | 2570 mm |
1. Dimensional length | 8510 mm | 1. Dimensional length | 8310 mm |
2. Between tyres width | 2440 mm | 2. Between tyres width | 2410 mm |