vs.

      John Deere 872D vs. Volvo G720 VHP

      14 reasons to buy John Deere 872D:

      Steerage

      Turn radius 7.2 m and 7.8 m 8 % less or 0.6 m

      Operation

      Fuel Capacity 401.2 l. and 387.5 l. 3 % more or 13.7 l.
      Cooling system fluid volume 49.2 l. and 47 l. 4 % more or 2.2 l.
      Front axle standard operating weight 4613 kg and 4361 kg 5 % more or 252 kg
      Rear differential/final drive fluid volume 36 l. and 23 l. 36 % more or 13 l.
      Rear axle standard operating weight 11812 kg and 10415 kg 12 % more or 1397 kg

      Motor

      Effective drives torque 7-8 1277 Nm and 862.3 Nm 32 % more or 414.7 Nm
      Effective speeds output 7-8 175.2 kW and 145.4 kW 17 % more or 29.8 kW
      Maximum power 182.7 kW and 145.4 kW 20 % more or 37.3 kW

      Gear box

      Reverse gears number 8 and 4 50 % more or 4
      Maximum reverse gear 41.1 km/h and 32.7 km/h 20 % more or 8.4 km/h

      Dump

      Blade pulling at maximum weight 19849 kg and 3562.1 kg 82 % more or 16286.9 kg

      Circle

      Right maximum radius outside tyres 2310 mm and 3035.3 mm 24 % less or 725.3 mm
      Maximum radius outside left tyres 2320 mm and 3048 mm 24 % less or 728 mm

      9 reasons to buy Volvo G720 VHP:

      Operation

      Hydraulic system fluid volume 90 l. and 53 l. 41 % more or 37 l.
      Transmission fluid volume 38 l. and 22.7 l. 40 % more or 15.3 l.
      Each tandem case fluid volume 100 l. and 75.7 l. 24 % more or 24.3 l.

      Motor

      Displacement 8.3 l. and 8.1 l. 2 % more or 0.2 l.

      Hydraulic system

      Pump flow rate 191 l/min and 207 l/min 8 % less or 16 l/min

      Gear box

      Maximum forward speed 45.7 km/h and 41.1 km/h 10 % more or 4.6 km/h

      Front Axle

      Clearance 609.6 mm and 587 mm 4 % more or 22.6 mm

      Circle

      Blade tilt front angle 45 degrees and 42 degrees 7 % more or 3 degrees
      Blade tilt rear angle 6.5 degrees and 5 degrees 23 % more or 1.5 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 72 degrees

      Sizes

      Height to cab upper part 3180 mm and 3099 mm
      Dimensional length 8804 mm and 8484 mm
      Between tyres width 2640 mm and 2540 mm
      Wheelbase 6120 mm and 6096 mm
      Blade base 2533 mm and 2591 mm

      Operation

      Operating voltage 24 V and 24 V
      Overall standard operating weight 16421 kg and 14774 kg

      Motor

      Cylinders number 6 and 6
      Aspiration Turbocharged engine with subsequent cooling of charging air by oncoming air flow and turbocharging
      Manufacturer John Deere and Cummins
      Model 6081H and 6C8.3

      Hydraulic system

      Overflow valve pressure 18960.6 kPa and 17236.9 kPa
      Type of pump variable displacement piston pump and hydraulic system with load sensing

      Gear box

      Transmission type Powershift transmission with direct drive and Volvo 8400
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 20 degrees and 18 degrees
      General fluctuations 32 degrees and 16 degrees

      Dump

      Mouldboard width 4300 mm and 3657.6 mm
      Mouldboard height 686 mm and 635 mm
      Mouldboard thickness 25 mm and 22.2 mm
      Left lateral displacement 680 mm and 673.1 mm
      Lateral right shift 680 mm and 673.1 mm

      Circle

      Rotating 360 degrees and 360 degrees
      Left shift 787 mm and 774.7 mm
      Right shift 724 mm and 749.3 mm

      Images

      Sizes

      1. Dimensional length 8804 mm 1. Dimensional length 8484 mm
      2. Between tyres width 2640 mm 2. Between tyres width 2540 mm
      3. Height to cab upper part 3180 mm 3. Height to cab upper part 3099 mm
      4. Wheelbase 6120 mm 4. Wheelbase 6096 mm
      8. Blade base 2533 mm 8. Blade base 2591 mm