vs.

      Komatsu GD625A-1 vs. New Holland F200

      4 reasons to buy Komatsu GD625A-1:

      Steerage

      Turn radius 6.7 m and 7.3 m 8 % less or 0.6 m

      Motor

      Displacement 11.1 l. and 8.3 l. 25 % more or 2.8 l.

      Gear box

      Maximum forward speed 45 km/h and 43 km/h 4 % more or 2 km/h
      Maximum reverse gear 54.8 km/h and 30.6 km/h 44 % more or 24.2 km/h

      4 reasons to buy New Holland F200:

      Sizes

      Rear ground clearance 610 mm and 355 mm 42 % more or 255 mm

      Operation

      Fuel Capacity 341 l. and 285 l. 16 % more or 56 l.

      Gear box

      Forward gears number 8 and 6 25 % more or 2

      Front Axle

      Clearance 622 mm and 355 mm 43 % more or 267 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 26 degrees and 25 degrees

      Sizes

      Dual axis wheelbase 1535 mm and 1602 mm
      Dimensional length 8500 mm and 8555 mm
      Between tyres width 2395 mm and 2650 mm
      Wheelbase 6000 mm and 6219 mm
      Blade base 2600 mm and 2562 mm
      Height to cab upper part 3305 mm and 3340 mm

      Operation

      Tyre size 13.00-24-10PR and 14.00 x 24 (10PR)

      Motor

      Cylinders number 6 and 6
      Manufacturer Komatsu and Cummins
      Model 6D125 and 6 CTAA 8.3 2 level
      Power measured at 2200 rev / min and 2200 rev / min

      Dump

      Mouldboard width 3658 mm and 4267 mm
      Mouldboard height 645 mm and 671 mm

      Images

      Sizes

      8. Blade base 2600 mm 8. Blade base 2562 mm
      1. Dimensional length 8500 mm 1. Dimensional length 8555 mm
      2. Between tyres width 2395 mm 2. Between tyres width 2650 mm
      3. Height to cab upper part 3305 mm 3. Height to cab upper part 3340 mm
      4. Wheelbase 6000 mm 4. Wheelbase 6219 mm
      5. Rear ground clearance 355 mm 5. Rear ground clearance 610 mm
      7. Dual axis wheelbase 1535 mm 7. Dual axis wheelbase 1602 mm