vs.

      Komatsu GD825A-2 vs. Volvo G940

      15 reasons to buy Komatsu GD825A-2:

      Steerage

      Turn radius 7.9 m and 7265 m 100 % less or 7257.1 m

      Operation

      Oil system fluid volume 38 l. and 21.5 l. 43 % more or 16.5 l.
      Cooling system fluid volume 58 l. and 31 l. 47 % more or 27 l.
      Each tandem case fluid volume 190 l. and 100 l. 47 % more or 90 l.
      Front axle maximum operating weight 7910 kg and 7570 kg 4 % more or 340 kg
      Rear axle maximum operating weight 18450 kg and 14240 kg 23 % more or 4210 kg
      Fuel Capacity 500 l. and 404 l. 19 % more or 96 l.

      Motor

      Maximum power 208.8 kW and 167.8 kW 20 % more or 41.0 kW
      Power measured at 2100 rev / min and 1800 rev / min 14 % more or 300 rev
      Effective speeds output 7-8 208.8 kW and 167.8 kW 20 % more or 41.0 kW

      Gear box

      Reverse gears number 8 and 4 50 % more or 4
      Maximum reverse gear 47.9 km/h and 32 km/h 33 % more or 15.9 km/h

      Front Axle

      Clearance 680 mm and 610 mm 10 % more or 70 mm

      Dump

      Blade pulling at maximum weight 13720 kg and 12816 kg 7 % more or 904 kg

      Circle

      Blade tilt front angle 49 degrees and 45 degrees 8 % more or 4 degrees

      9 reasons to buy Volvo G940:

      Operation

      Hydraulic system fluid volume 91 l. and 80 l. 12 % more or 11 l.
      Generator current strength 80 amperes and 50 amperes 37 % more or 30 amperes
      Transmission fluid volume 61 l. and 25 l. 59 % more or 36 l.

      Motor

      Displacement 7.2 l. and 5.9 l. 18 % more or 1.3 l.

      Gear box

      Maximum forward speed 45.4 km/h and 44.9 km/h 1 % more or 0.5 km/h

      Dump

      Maximum cutting depth 787.4 mm and 480 mm 39 % more or 307.4 mm

      Circle

      Blade tilt rear angle 6 degrees and 5 degrees 17 % more or 1 degrees
      Maximum radius outside left tyres 2020 mm and 2400 mm 16 % less or 380 mm
      Right maximum radius outside tyres 2010 mm and 2400 mm 16 % less or 390 mm

      Neutral reasons:

      Sizes

      Height to cab upper part 3550 mm and 3225 mm
      Dimensional length 10010 mm and 9150 mm
      Between tyres width 3310 mm and 2537 mm
      Wheelbase 7132.3 mm and 6280 mm
      Blade base 3100 mm and 2650 mm

      Operation

      Tyre size 23.5 X 25-12PR (L3) tires and 14:00 x 24, G-2
      Operating voltage 24 V and 24 V
      Total maximum operating weight 26420 kg and 21320 kg

      Motor

      Manufacturer Komatsu and Volvo
      Model S6D140E and D7E
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump Double-acting hydraulic cylinders of piston-type and axial piston pump
      Overflow valve pressure 24545.3 kPa and 20684.3 kPa

      Gear box

      Transmission type komatsu Hydro-Static Transmission and HTE840, Sequential direct drive gearbox with shifting under load Volvo
      Forward gears number 8 and 8

      Front Axle

      General fluctuations 32 degrees and 16 degrees
      Wheel tilt 14.5 degrees and 18 degrees

      Dump

      Mouldboard width 4928 mm and 3657.6 mm
      Mouldboard height 800 mm and 635 mm
      Mouldboard thickness 25 mm and 22 mm

      Circle

      Diameter 1775 mm and 1626 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      8. Blade base 3100 mm 8. Blade base 2650 mm
      1. Dimensional length 10010 mm 1. Dimensional length 9150 mm
      2. Between tyres width 3310 mm 2. Between tyres width 2537 mm
      3. Height to cab upper part 3550 mm 3. Height to cab upper part 3225 mm
      4. Wheelbase 7132.3 mm 4. Wheelbase 6280 mm