- Home/
- Comparison/
- Grader/
- Mauldin MG618 vs. John Deere 672A
Mauldin MG618 vs. John Deere 672A
7 reasons to buy Mauldin MG618:
Steerage
Turn radius | 5.5 m and 6.9 m | 20 % less or 1.4 m |
Motor
Maximum power | 99.2 kW and 93.2 kW | 6 % more or 6.0 kW |
Gear box
Maximum reverse gear | 27.4 km/h and 12.2 km/h | 55 % more or 15.2 km/h |
Circle
Maximum radius outside left tyres | 914.4 mm and 2220 mm | 59 % less or 1305.6 mm |
Right maximum radius outside tyres | 914.4 mm and 2150 mm | 57 % less or 1235.6 mm |
Blade tilt front angle | 45 degrees and 44 degrees | 2 % more or 1 degrees |
Blade tilt rear angle | 45 degrees and 10 degrees | 78 % more or 35 degrees |
9 reasons to buy John Deere 672A:
Operation
Front axle standard operating weight | 3947 kg and 2540.1 kg | 36 % more or 1406.9 kg |
Rear axle standard operating weight | 8460 kg and 5892.2 kg | 30 % more or 2567.8 kg |
Fuel Capacity | 227 l. and 151.4 l. | 33 % more or 75.6 l. |
Hydraulic system fluid volume | 143.8 l. and 75.7 l. | 47 % more or 68.1 l. |
Motor
Displacement | 6.8 l. and 4 l. | 41 % more or 2.8 l. |
Gear box
Forward gears number | 8 and 2 | 75 % more or 6 |
Reverse gears number | 4 and 2 | 50 % more or 2 |
Maximum forward speed | 38.5 km/h and 27.4 km/h | 29 % more or 11.1 km/h |
Circle
Maximum lifting above ground level | 409 mm and 349.3 mm | 15 % more or 59.7 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 32 degrees and 25 degrees |
Sizes
Height to cab upper part | 2767.6 mm and 3200 mm |
Dimensional length | 7010.4 mm and 8310 mm |
Between tyres width | 2258.6 mm and 2390 mm |
Wheelbase | 5029.2 mm and 5970 mm |
Blade base | 2069.6 mm and 2540 mm |
Dual axis wheelbase | 1130.8 mm and 1540 mm |
Operation
Tyre size | 15-19.5 and 13.00-24 |
Operating voltage | 12 V and 25 V |
Overall standard operating weight | 8432.3 kg and 12407 kg |
Motor
Aspiration | turbocharging and cooling at the outlet and turbocharging |
Manufacturer | Deutz and John Deere |
Model | 2012 and 6-414T |
Gear box
Transmission type | hydrostatic and powershift transmission |
Front Axle
Wheel tilt | 20 degrees and 20 degrees |
General fluctuations | 30 degrees and 30 degrees |
Dump
Mouldboard width | 3048 mm and 3.7 mm |
Mouldboard height | 482.6 mm and 610 mm |
Images
Sizes
4. Wheelbase | 5029.2 mm | 4. Wheelbase | 5970 mm |
7. Dual axis wheelbase | 1130.8 mm | 7. Dual axis wheelbase | 1540 mm |
8. Blade base | 2069.6 mm | 8. Blade base | 2540 mm |
1. Dimensional length | 7010.4 mm | 1. Dimensional length | 8310 mm |
2. Between tyres width | 2258.6 mm | 2. Between tyres width | 2390 mm |
3. Height to cab upper part | 2767.6 mm | 3. Height to cab upper part | 3200 mm |