- Home/
- Comparison/
- Grader/
- Mauldin MG622 vs. John Deere 770CH
Mauldin MG622 vs. John Deere 770CH
4 reasons to buy Mauldin MG622:
Steerage
Turn radius | 6.2 m and 6.7 m | 7 % less or 0.5 m |
Operation
Hydraulic system fluid volume | 94.6 l. and 59 l. | 38 % more or 35.6 l. |
Circle
Maximum radius outside left tyres | 1962.2 mm and 2160 mm | 9 % less or 197.8 mm |
Right maximum radius outside tyres | 1816.1 mm and 2110 mm | 14 % less or 293.9 mm |
11 reasons to buy John Deere 770CH:
Operation
Front axle standard operating weight | 3987.1 kg and 3036.8 kg | 24 % more or 950.3 kg |
Fuel Capacity | 401.3 l. and 151.4 l. | 62 % more or 249.9 l. |
Rear axle standard operating weight | 10301.1 kg and 7323.2 kg | 29 % more or 2977.9 kg |
Motor
Maximum power | 152.9 kW and 99.2 kW | 35 % more or 53.7 kW |
Effective drives torque 1-2 | 772.8 Nm and 492.6 Nm | 36 % more or 280.2 Nm |
Displacement | 8.1 l. and 4 l. | 51 % more or 4.1 l. |
Gear box
Forward gears number | 8 and 2 | 75 % more or 6 |
Reverse gears number | 8 and 2 | 75 % more or 6 |
Maximum forward speed | 41.5 km/h and 35.4 km/h | 15 % more or 6.1 km/h |
Maximum reverse gear | 41.5 km/h and 35.4 km/h | 15 % more or 6.1 km/h |
Circle
Maximum lifting above ground level | 470 mm and 358.1 mm | 24 % more or 111.9 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 24 degrees and 25 degrees |
Sizes
Height to cab upper part | 2947.4 mm and 3120 mm |
Dimensional length | 8345.4 mm and 8610 mm |
Between tyres width | 2532.9 mm and 2510 mm |
Wheelbase | 5282.2 mm and 5970 mm |
Blade base | 2362.2 mm and 2670 mm |
Dual axis wheelbase | 1447.8 mm and 1540 mm |
Operation
Overall standard operating weight | 10360.1 kg and 14288.2 kg |
Tyre size | 15.5-25 and 14.00-24 |
Operating voltage | 12 V and 24 V |
Motor
Manufacturer | Deutz and John Deere |
Model | 2012 and 6081H |
Aspiration | turbocharging and cooling at the outlet and Turbocharging with subsequent air cooling (by a cooling radiator) |
Gear box
Transmission type | hydrostatic and powershift |
Front Axle
Wheel tilt | 20 degrees and 20 degrees |
General fluctuations | 30 degrees and 32 degrees |
Dump
Lateral right shift | 679.5 mm and 683 mm |
Mouldboard width | 3657.6 mm and 3657.6 mm |
Mouldboard height | 558.8 mm and 609.6 mm |
Left lateral displacement | 793.8 mm and 683 mm |
Circle
Diameter | 1371.6 mm and 1520 mm |
Images
Sizes
1. Dimensional length | 8345.4 mm | 1. Dimensional length | 8610 mm |
2. Between tyres width | 2532.9 mm | 2. Between tyres width | 2510 mm |
3. Height to cab upper part | 2947.4 mm | 3. Height to cab upper part | 3120 mm |
4. Wheelbase | 5282.2 mm | 4. Wheelbase | 5970 mm |
7. Dual axis wheelbase | 1447.8 mm | 7. Dual axis wheelbase | 1540 mm |
8. Blade base | 2362.2 mm | 8. Blade base | 2670 mm |