- Home/
- Comparison/
- Grader/
- Mitsubishi MG130-E vs. Caterpillar 160H ES
Mitsubishi MG130-E vs. Caterpillar 160H ES
2 reasons to buy Mitsubishi MG130-E:
Hydraulic system
Pump flow rate | 106 l/min and 206 l/min | 49 % less or 100 l/min |
Gear box
Maximum reverse gear | 33.2 km/h and 32.1 km/h | 3 % more or 1.1 km/h |
8 reasons to buy Caterpillar 160H ES:
Operation
Hydraulic system fluid volume | 80 l. and 67 l. | 16 % more or 13 l. |
Generator current strength | 50 amperes and 30 amperes | 40 % more or 20 amperes |
Fuel Capacity | 341 l. and 115 l. | 66 % more or 226 l. |
Motor
Maximum power | 149.1 kW and 70.8 kW | 53 % more or 78.3 kW |
Displacement | 10.5 l. and 4.2 l. | 60 % more or 6.3 l. |
Gear box
Forward gears number | 8 and 6 | 25 % more or 2 |
Maximum forward speed | 40.7 km/h and 32.6 km/h | 20 % more or 8.1 km/h |
Circle
Maximum lifting above ground level | 452 mm and 400 mm | 12 % more or 52 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 26 degrees and 20 degrees |
Sizes
Height to cab upper part | 3010 mm and 3120 mm |
Dimensional length | 6910 mm and 8600 mm |
Between tyres width | 2140 mm and 2480 mm |
Wheelbase | 4900 mm and 6090 mm |
Blade base | 2135 mm and 2520 mm |
Operation
Operating voltage | 24 V and 24 V |
Tyre size | 10.00-20-12 and 14-24 12PR (G-2) |
Overall standard operating weight | 10060 kg and 15586 kg |
Motor
Manufacturer | Mitsubishi and Caterpillar |
Model | SK4-T and 3306 DITA |
Hydraulic system
Type of pump | Pump with double gear and Axial-piston pump |
Overflow valve pressure | 17.2 kPa and 24131.6 kPa |
Gear box
Reverse gears number | 6 and 6 |
Front Axle
Wheel tilt | 20 degrees and 18 degrees |
General fluctuations | 30 degrees and 32 degrees |
Dump
Mouldboard thickness | 19 mm and 25 mm |
Mouldboard height | 610 mm and 686 mm |
Mouldboard width | 3100 mm and 7270 mm |
Images
Sizes
1. Dimensional length | 6910 mm | 1. Dimensional length | 8600 mm |
2. Between tyres width | 2140 mm | 2. Between tyres width | 2480 mm |
3. Height to cab upper part | 3010 mm | 3. Height to cab upper part | 3120 mm |
4. Wheelbase | 4900 mm | 4. Wheelbase | 6090 mm |
8. Blade base | 2135 mm | 8. Blade base | 2520 mm |