- Home/
- Comparison/
- Grader/
- Mitsubishi MG230-E vs. Volvo G710B
Mitsubishi MG230-E vs. Volvo G710B
4 reasons to buy Mitsubishi MG230-E:
Motor
Power measured at | 2500 rev / min and 2200 rev / min | 12 % more or 300 rev |
Hydraulic system
Pump flow rate | 110 l/min and 284 l/min | 61 % less or 174 l/min |
Gear box
Reverse gears number | 6 and 4 | 33 % more or 2 |
Maximum reverse gear | 33.2 km/h and 28.6 km/h | 14 % more or 4.6 km/h |
12 reasons to buy Volvo G710B:
Operation
Transmission fluid volume | 38 l. and 23 l. | 39 % more or 15 l. |
Each tandem case fluid volume | 100 l. and 28 l. | 72 % more or 72 l. |
Generator current strength | 75 amperes and 40 amperes | 47 % more or 35 amperes |
Fuel Capacity | 378.5 l. and 210 l. | 45 % more or 168.5 l. |
Hydraulic system fluid volume | 134 l. and 110 l. | 18 % more or 24 l. |
Motor
Displacement | 7.1 l. and 5.9 l. | 17 % more or 1.2 l. |
Maximum power | 129 kW and 85.8 kW | 33 % more or 43.2 kW |
Gear box
Forward gears number | 8 and 6 | 25 % more or 2 |
Maximum forward speed | 40.1 km/h and 32.6 km/h | 19 % more or 7.5 km/h |
Front Axle
Clearance | 597 mm and 480 mm | 20 % more or 117 mm |
Circle
Maximum lifting above ground level | 431.8 mm and 430 mm | 0 % more or 1.8 mm |
Blade tilt front angle | 47 degrees and 40 degrees | 15 % more or 7 degrees |
Neutral reasons:
Steerage
Left and right hinge connection | 26 degrees and 22 degrees |
Sizes
Height to cab upper part | 3030 mm and 3073 mm |
Dimensional length | 7325 mm and 9093 mm |
Between tyres width | 2140 mm and 2489 mm |
Wheelbase | 5300 mm and 6096 mm |
Blade base | 2185 mm and 2616 mm |
Operation
Tyre size | 13.00-24-12 and 13.00 x 24, G-2 |
Operating voltage | 24 V and 24 V |
Overall standard operating weight | 11060 kg and 15150 kg |
Motor
Manufacturer | Mitsubishi and Volvo |
Model | 6D34-TE1 and D7DGAE2 |
Hydraulic system
Overflow valve pressure | 17.2 kPa and 18615.8 kPa |
Type of pump | Pump with double gear and hydraulic system with load sensing |
Gear box
Transmission type | planetary gear and powershift transmission |
Front Axle
Wheel tilt | 20 degrees and 18 degrees |
General fluctuations | 30 degrees and 16 degrees |
Dump
Mouldboard width | 3100 mm and 3657.6 mm |
Mouldboard height | 610 mm and 635 mm |
Mouldboard thickness | 19 mm and 22.2 mm |
Circle
Right shift | 1680 mm and 749.3 mm |
Blade tilt rear angle | 5 degrees and 5 degrees |
Rotating | 360 degrees and 360 degrees |
Left shift | 1650 mm and 774.7 mm |
Images
Sizes
1. Dimensional length | 7325 mm | 1. Dimensional length | 9093 mm |
2. Between tyres width | 2140 mm | 2. Between tyres width | 2489 mm |
3. Height to cab upper part | 3030 mm | 3. Height to cab upper part | 3073 mm |
4. Wheelbase | 5300 mm | 4. Wheelbase | 6096 mm |
8. Blade base | 2185 mm | 8. Blade base | 2616 mm |