- Home/
- Comparison/
- Grader/
- Mitsubishi MG330-E vs. Caterpillar 140H ES
Mitsubishi MG330-E vs. Caterpillar 140H ES
3 reasons to buy Mitsubishi MG330-E:
Hydraulic system
Pump flow rate | 120 l/min and 206 l/min | 42 % less or 86 l/min |
Gear box
Maximum forward speed | 42.6 km/h and 41.1 km/h | 4 % more or 1.5 km/h |
Maximum reverse gear | 43.3 km/h and 32.4 km/h | 25 % more or 10.9 km/h |
6 reasons to buy Caterpillar 140H ES:
Operation
Fuel Capacity | 341 l. and 230 l. | 33 % more or 111 l. |
Hydraulic system fluid volume | 80 l. and 67 l. | 16 % more or 13 l. |
Generator current strength | 50 amperes and 40 amperes | 20 % more or 10 amperes |
Motor
Maximum power | 138 kW and 100.7 kW | 27 % more or 37.3 kW |
Displacement | 10.5 l. and 7.5 l. | 29 % more or 3.0 l. |
Gear box
Forward gears number | 8 and 6 | 25 % more or 2 |
Neutral reasons:
Steerage
Left and right hinge connection | 26 degrees and 20 degrees |
Sizes
Height to cab upper part | 3130 mm and 3120 mm |
Dimensional length | 7820 mm and 8600 mm |
Between tyres width | 2450 mm and 2460 mm |
Wheelbase | 5700 mm and 6090 mm |
Blade base | 2500 mm and 2570 mm |
Operation
Overall standard operating weight | 15600 kg and 14724 kg |
Tyre size | 14.00-24-12 and 14-24 10PR (G-2) |
Operating voltage | 24 V and 24 V |
Motor
Manufacturer | Mitsubishi and Caterpillar |
Model | 6D16-TE1 and 3306 DIT |
Hydraulic system
Overflow valve pressure | 17.2 kPa and 24131.6 kPa |
Type of pump | Pump with double gear and Axial-piston pump |
Gear box
Reverse gears number | 6 and 6 |
Front Axle
Wheel tilt | 20 degrees and 18 degrees |
General fluctuations | 30 degrees and 32 degrees |
Dump
Mouldboard width | 3710 mm and 3660 mm |
Mouldboard height | 610 mm and 610 mm |
Mouldboard thickness | 22 mm and 22 mm |
Circle
Maximum lifting above ground level | 480 mm and 480 mm |
Images
Sizes
1. Dimensional length | 7820 mm | 1. Dimensional length | 8600 mm |
2. Between tyres width | 2450 mm | 2. Between tyres width | 2460 mm |
3. Height to cab upper part | 3130 mm | 3. Height to cab upper part | 3120 mm |
4. Wheelbase | 5700 mm | 4. Wheelbase | 6090 mm |
8. Blade base | 2500 mm | 8. Blade base | 2570 mm |