vs.

      Mitsubishi MG530-E vs. Caterpillar 12G

      9 reasons to buy Mitsubishi MG530-E:

      Operation

      Each tandem case fluid volume 85 l. and 64 l. 25 % more or 21 l.
      Generator current strength 40 amperes and 19 amperes 52 % more or 21 amperes

      Motor

      Maximum power 138 kW and 100.7 kW 27 % more or 37.3 kW
      Displacement 11.1 l. and 10.5 l. 5 % more or 0.6 l.

      Hydraulic system

      Pump flow rate 100 l/min and 193 l/min 48 % less or 93 l/min

      Gear box

      Maximum forward speed 46.6 km/h and 41 km/h 12 % more or 5.6 km/h
      Maximum reverse gear 47.5 km/h and 41 km/h 14 % more or 6.5 km/h

      Front Axle

      Clearance 652 mm and 610 mm 6 % more or 42 mm

      Circle

      Maximum lifting above ground level 460 mm and 438 mm 5 % more or 22 mm

      7 reasons to buy Caterpillar 12G:

      Operation

      Hydraulic system fluid volume 76 l. and 67 l. 12 % more or 9 l.
      Transmission fluid volume 87 l. and 32 l. 63 % more or 55 l.
      Fuel Capacity 283 l. and 275 l. 3 % more or 8 l.
      Oil system fluid volume 29 l. and 26 l. 10 % more or 3 l.

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev

      Circle

      Blade tilt front angle 90 degrees and 40 degrees 56 % more or 50 degrees
      Blade tilt rear angle 90 degrees and 9 degrees 90 % more or 81 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 26 degrees and 50 degrees

      Sizes

      Height to cab upper part 3140 mm and 3330 mm
      Dimensional length 8745 mm and 8310 mm
      Between tyres width 2665 mm and 2410 mm
      Wheelbase 6250 mm and 5920 mm
      Blade base 2670 mm and 2570 mm

      Operation

      Operating voltage 24 V and 24 V
      Overall standard operating weight 18225 kg and 12700 kg

      Motor

      Manufacturer Mitsubishi and Caterpillar
      Cylinders number 6 and 6

      Hydraulic system

      Overflow valve pressure 17.2 kPa and 14823.7 kPa
      Type of pump Pump with double gear and Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume

      Gear box

      Forward gears number 6 and 6
      Reverse gears number 6 and 6
      Transmission type planetary gear and Powershift transmission with direct drive

      Front Axle

      Wheel tilt 20 degrees and 18 degrees
      General fluctuations 30 degrees and 32 degrees

      Dump

      Mouldboard height 720 mm and 610 mm
      Mouldboard thickness 22 mm and 22 mm

      Circle

      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8745 mm 1. Dimensional length 8310 mm
      2. Between tyres width 2665 mm 2. Between tyres width 2410 mm
      3. Height to cab upper part 3140 mm 3. Height to cab upper part 3330 mm
      4. Wheelbase 6250 mm 4. Wheelbase 5920 mm
      8. Blade base 2670 mm 8. Blade base 2570 mm