- Home/
- Comparison/
- Grader/
- New Holland F106.6A vs. Caterpillar 160M2 AWD
New Holland F106.6A vs. Caterpillar 160M2 AWD
3 reasons to buy New Holland F106.6A:
Operation
Each tandem case fluid volume | 74 l. and 64 l. | 14 % more or 10 l. |
Hydraulic system fluid volume | 185 l. and 99.9 l. | 46 % more or 85.1 l. |
Hydraulic system
Pump flow rate | 95 l/min and 210.1 l/min | 55 % less or 115.1 l/min |
20 reasons to buy Caterpillar 160M2 AWD:
Steerage
Turn radius | 7.8 m and 7450 m | 100 % less or 7442.2 m |
Sizes
Rear ground clearance | 344 mm and 307 mm | 11 % more or 37 mm |
Front part clearance | 600 mm and 136 mm | 77 % more or 464 mm |
Operation
Rear axle maximum operating weight | 16530.7 kg and 8200 kg | 50 % more or 8330.7 kg |
Transmission fluid volume | 65.1 l. and 21 l. | 68 % more or 44.1 l. |
Fuel Capacity | 416.4 l. and 189 l. | 55 % more or 227.4 l. |
Oil system fluid volume | 29.9 l. and 12.5 l. | 58 % more or 17.4 l. |
Generator current strength | 150 amperes and 70 amperes | 53 % more or 80 amperes |
Front axle standard operating weight | 5805.1 kg and 3005 kg | 48 % more or 2800.1 kg |
Rear axle standard operating weight | 14707.3 kg and 7625 kg | 48 % more or 7082.3 kg |
Front axle maximum operating weight | 6052.3 kg and 3800 kg | 37 % more or 2252.3 kg |
Gear box
Forward gears number | 8 and 6 | 25 % more or 2 |
Reverse gears number | 6 and 3 | 50 % more or 3 |
Maximum forward speed | 46.7 km/h and 37.8 km/h | 19 % more or 8.9 km/h |
Maximum reverse gear | 36.9 km/h and 27.9 km/h | 24 % more or 9.0 km/h |
Front Axle
Clearance | 600 mm and 504 mm | 16 % more or 96 mm |
Dump
Maximum cutting depth | 750 mm and 450 mm | 40 % more or 300 mm |
Circle
Maximum radius outside left tyres | 2090 mm and 2150 mm | 3 % less or 60 mm |
Right maximum radius outside tyres | 2278 mm and 2490 mm | 9 % less or 212 mm |
Maximum lifting above ground level | 452 mm and 400 mm | 12 % more or 52 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 28 degrees and 20 degrees |
Sizes
Dimensional length | 8888 mm and 8898 mm |
Between tyres width | 2327 mm and 2581 mm |
Wheelbase | 5243 mm and 6126 mm |
Blade base | 1981 mm and 2557 mm |
Dual axis wheelbase | 1250 mm and 1523 mm |
Height to cab upper part | 3184 mm and 3287 mm |
Operation
Total maximum operating weight | 11500 kg and 23947.4 kg |
Operating voltage | 24 V and 24 V |
Overall standard operating weight | 10630 kg and 20511.9 kg |
Motor
Model | CNH 4-stroke cycle, naturally aspirated diesel engine and C9.3 ACERT VHP |
Power measured at | 2100 rev / min and 2100 rev / min |
Cylinders number | 6 and 6 |
Hydraulic system
Type of pump | Axial cam pump, variable displacement piston pump and variable displacement piston pump |
Overflow valve pressure | 20000 kPa and 24152.3 kPa |
Gear box
Transmission type | powershift transmission and Powershift transmission with direct drive |
Front Axle
Wheel tilt | 22 degrees and 18 degrees |
General fluctuations | 15 degrees and 32 degrees |
Dump
Mouldboard width | 3355 mm and 4267.2 mm |
Mouldboard height | 152 mm and 609.6 mm |
Mouldboard thickness | 19 mm and 22 mm |
Left lateral displacement | 700 mm and 510 mm |
Lateral right shift | 500 mm and 660 mm |
Circle
Rotating | degrees and 360 degrees |
Left shift | 700 mm and 695 mm |
Right shift | 500 mm and 728 mm |
Images
Sizes
1. Dimensional length | 8888 mm | 1. Dimensional length | 8898 mm |
2. Between tyres width | 2327 mm | 2. Between tyres width | 2581 mm |
3. Height to cab upper part | 3184 mm | 3. Height to cab upper part | 3287 mm |
4. Wheelbase | 5243 mm | 4. Wheelbase | 6126 mm |
5. Rear ground clearance | 307 mm | 5. Rear ground clearance | 344 mm |
6. Front part clearance | 136 mm | 6. Front part clearance | 600 mm |
7. Dual axis wheelbase | 1250 mm | 7. Dual axis wheelbase | 1523 mm |
8. Blade base | 1981 mm | 8. Blade base | 2557 mm |