- Home/
- Comparison/
- Grader/
- New Holland F156.6 vs. New Holland F106.6A
New Holland F156.6 vs. New Holland F106.6A
12 reasons to buy New Holland F156.6:
Sizes
Rear ground clearance | 328 mm and 307 mm | 6 % more or 21 mm |
Front part clearance | 141 mm and 136 mm | 4 % more or 5 mm |
Operation
Fuel Capacity | 275 l. and 189 l. | 31 % more or 86 l. |
Front axle maximum operating weight | 5200 kg and 3800 kg | 27 % more or 1400 kg |
Rear axle maximum operating weight | 11500 kg and 8200 kg | 29 % more or 3300 kg |
Front axle standard operating weight | 4496 kg and 3005 kg | 33 % more or 1491 kg |
Rear axle standard operating weight | 9841 kg and 7625 kg | 23 % more or 2216 kg |
Motor
Effective speeds output 5-6 | 130.5 kW and 100.7 kW | 23 % more or 29.8 kW |
Maximum power | 130.5 kW and 100.7 kW | 23 % more or 29.8 kW |
Front Axle
Clearance | 646 mm and 504 mm | 22 % more or 142 mm |
Dump
Maximum cutting depth | 500 mm and 450 mm | 10 % more or 50 mm |
Circle
Maximum lifting above ground level | 480 mm and 400 mm | 17 % more or 80 mm |
8 reasons to buy New Holland F106.6A:
Steerage
Turn radius | 7450 m and 8250 m | 10 % less or 800 m |
Operation
Each tandem case fluid volume | 74 l. and 68 l. | 8 % more or 6 l. |
Motor
Displacement | 96.4 l. and 5.9 l. | 94 % more or 90.5 l. |
Hydraulic system
Pump flow rate | 95 l/min and 126 l/min | 25 % less or 31 l/min |
Gear box
Maximum forward speed | 37.8 km/h and 37.4 km/h | 1 % more or 0.4 km/h |
Maximum reverse gear | 27.9 km/h and 27.1 km/h | 3 % more or 0.8 km/h |
Circle
Maximum radius outside left tyres | 2150 mm and 2520 mm | 15 % less or 370 mm |
Right maximum radius outside tyres | 2490 mm and 3210 mm | 22 % less or 720 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 28 degrees and 28 degrees |
Sizes
Wheelbase | 5983 mm and 5243 mm |
Blade base | 2504 mm and 1981 mm |
Dual axis wheelbase | 1544 mm and 1250 mm |
Height to cab upper part | 3373 mm and 3184 mm |
Dimensional length | 9975 mm and 8888 mm |
Between tyres width | 2595 mm and 2327 mm |
Operation
Hydraulic system fluid volume | 185 l. and 185 l. |
Transmission fluid volume | 21 l. and 21 l. |
Total maximum operating weight | 16200 kg and 11500 kg |
Oil system fluid volume | 12.5 l. and 12.5 l. |
Tyre size | 17.5R25EM and 405/70R20 |
Operating voltage | 24 V and 24 V |
Generator current strength | 70 amperes and 70 amperes |
Overall standard operating weight | 14336 kg and 10630 kg |
Motor
Model | CNH 4-stroke cycle, naturally aspirated diesel engine and CNH 4-stroke cycle, naturally aspirated diesel engine |
Power measured at | 2100 rev / min and 2100 rev / min |
Cylinders number | 6 and 6 |
Aspiration | turbocharging water cooling and turbocharging, water cooling |
Hydraulic system
Overflow valve pressure | 20000 kPa and 20000 kPa |
Type of pump | Axial cam pump, variable displacement piston pump and Axial cam pump, variable displacement piston pump |
Gear box
Transmission type | powershift transmission and powershift transmission |
Forward gears number | 6 and 6 |
Reverse gears number | 3 and 3 |
Front Axle
Wheel tilt | 21 degrees and 22 degrees |
General fluctuations | 15 degrees and 15 degrees |
Dump
Mouldboard width | 3660 mm and 3355 mm |
Mouldboard height | 152 mm and 152 mm |
Mouldboard thickness | 19 mm and 19 mm |
Left lateral displacement | 645 mm and 700 mm |
Lateral right shift | 755 mm and 500 mm |
Circle
Right shift | 755 mm and 500 mm |
Rotating | degrees and degrees |
Left shift | 645 mm and 700 mm |
Images
Sizes
1. Dimensional length | 9975 mm | 1. Dimensional length | 8888 mm |
2. Between tyres width | 2595 mm | 2. Between tyres width | 2327 mm |
3. Height to cab upper part | 3373 mm | 3. Height to cab upper part | 3184 mm |
4. Wheelbase | 5983 mm | 4. Wheelbase | 5243 mm |
5. Rear ground clearance | 328 mm | 5. Rear ground clearance | 307 mm |
6. Front part clearance | 141 mm | 6. Front part clearance | 136 mm |
7. Dual axis wheelbase | 1544 mm | 7. Dual axis wheelbase | 1250 mm |
8. Blade base | 2504 mm | 8. Blade base | 1981 mm |