- Home/
- Comparison/
- Grader/
- New Holland F170 vs. Champion C66C
New Holland F170 vs. Champion C66C
6 reasons to buy New Holland F170:
Motor
Displacement | 8.3 l. and 3.9 l. | 53 % more or 4.4 l. |
Cylinders number | 6 and 4 | 33 % more or 2 |
Gear box
Maximum forward speed | 43 km/h and 32 km/h | 26 % more or 11 km/h |
Circle
Maximum radius outside left tyres | 1735 mm and 1905 mm | 9 % less or 170 mm |
Right maximum radius outside tyres | 1895 mm and 1905 mm | 1 % less or 10 mm |
Maximum lifting above ground level | 444 mm and 305 mm | 31 % more or 139 mm |
4 reasons to buy Champion C66C:
Steerage
Turn radius | 2.9 m and 7.3 m | 60 % less or 4.4 m |
Motor
Power measured at | 2500 rev / min and 2200 rev / min | 12 % more or 300 rev |
Gear box
Maximum reverse gear | 32 km/h and 28.5 km/h | 11 % more or 3.5 km/h |
Circle
Blade tilt front angle | 45 degrees and 40 degrees | 11 % more or 5 degrees |
Neutral reasons:
Steerage
Left and right hinge connection | 25 degrees and 27 degrees |
Sizes
Height to cab upper part | 3340 mm and 2769 mm |
Dimensional length | 8521 mm and 6350 mm |
Between tyres width | 2510 mm and 2184 mm |
Motor
Manufacturer | Cummins and Cummins |
Model | 6 CTAA 8.3 2 level and 4BT3.9 |
Gear box
Transmission type | Powershift transmission with direct drive and Hydro-Static Transmission |
Front Axle
Wheel tilt | 18 degrees and 15 degrees |
General fluctuations | 19 degrees and 35 degrees |
Dump
Mouldboard width | 3962 mm and 3048 mm |
Mouldboard height | 671 mm and 483 mm |
Mouldboard thickness | 22 mm and 16 mm |
Circle
Blade tilt rear angle | 5 degrees and 5 degrees |
Images
Sizes
1. Dimensional length | 8521 mm | 1. Dimensional length | 6350 mm |
2. Between tyres width | 2510 mm | 2. Between tyres width | 2184 mm |
3. Height to cab upper part | 3340 mm | 3. Height to cab upper part | 2769 mm |