- Home/
- Comparison/
- Grader/
- New Holland G140 vs. Case 845B DHP
New Holland G140 vs. Case 845B DHP
2 reasons to buy New Holland G140:
Sizes
Rear ground clearance | 622 mm and 380 mm | 39 % more or 242 mm |
Circle
Maximum lifting above ground level | 445 mm and 444.5 mm | 0 % more or 0.5 mm |
8 reasons to buy Case 845B DHP:
Steerage
Turn radius | 7.3 m and 7250 m | 100 % less or 7242.7 m |
Sizes
Front part clearance | 622 mm and 378 mm | 39 % more or 244 mm |
Operation
Front axle standard operating weight | 4496 kg and 3706.8 kg | 18 % more or 789.2 kg |
Generator current strength | 90 amperes and 80 amperes | 11 % more or 10 amperes |
Rear axle standard operating weight | 10109.2 kg and 9863.8 kg | 2 % more or 245.4 kg |
Transmission fluid volume | 79.5 l. and 17.8 l. | 78 % more or 61.7 l. |
Each tandem case fluid volume | 60.2 l. and 29.1 l. | 52 % more or 31.1 l. |
Motor
Effective drives torque 7-8 | 759.3 Nm and 746 Nm | 2 % more or 13.3 Nm |
Neutral reasons:
Steerage
Left and right hinge connection | 25 degrees and 25 degrees |
Sizes
Dimensional length | 8521 mm and 8534.4 mm |
Between tyres width | 2510 mm and 2499 mm |
Wheelbase | 6219 mm and 6219 mm |
Blade base | 2562 mm and 2562 mm |
Dual axis wheelbase | 1594 mm and 1572 mm |
Height to cab upper part | 3140 mm and 3340 mm |
Operation
Operating voltage | 24 V and 24 V |
Overall standard operating weight | 13570.6 kg and 14605.2 kg |
Fuel Capacity | 340.7 l. and 340.7 l. |
Cooling system fluid volume | 39.7 l. and 39.7 l. |
Hydraulic system fluid volume | 179.8 l. and 179.8 l. |
Circular gearbox fluid volume | 2.8 l. and 2.8 l. |
Tyre size | 14.00X24 10 layers G2 and 14.0 x 24-10 PR |
Motor
Effective speeds output 7-8 | 119.3 kW and 119.3 kW |
Aspiration | turbocharging and Turbocharged engine with subsequent cooling of charging air by oncoming air flow |
Displacement | 6.7 l. and 6.7 l. |
Manufacturer | Cummins and Case |
Model | QSB 6.7L and FPT 6.7L |
Power measured at | 2200 rev / min and 2200 rev / min |
Torque measured at | 1500 rev / min and 1500 rev / min |
Cylinders number | 6 and 6 |
Hydraulic system
Type of pump | variable displacement piston pump and piston type with load sensing |
Pump flow rate | 185.5 l/min and 185.5 l/min |
Gear box
Maximum forward speed | 42.8 km/h and 42.8 km/h |
Maximum reverse gear | 28.5 km/h and 28.5 km/h |
Transmission type | Powershift transmission with direct drive and Powershift transmission with direct drive |
Forward gears number | 8 and 8 |
Reverse gears number | 4 and 4 |
Front Axle
Wheel tilt | 17.5 degrees and 20 degrees |
General fluctuations | 19 degrees and 15.3 degrees |
Dump
Lateral right shift | 711 mm and 685.8 mm |
Left lateral displacement | 533 mm and 533.4 mm |
Lowered blade pressure | 6707.7 kg and 7644.8 kg |
Mouldboard width | 3657.6 mm and 3657.6 mm |
Mouldboard height | 622 mm and 558.8 mm |
Mouldboard thickness | 22 mm and 22 mm |
Circle
Diameter | 1753 mm and 1752.6 mm |
Rotating | 360 degrees and 360 degrees |
Images
Sizes
7. Dual axis wheelbase | 1594 mm | 7. Dual axis wheelbase | 1572 mm |
8. Blade base | 2562 mm | 8. Blade base | 2562 mm |
1. Dimensional length | 8521 mm | 1. Dimensional length | 8534.4 mm |
2. Between tyres width | 2510 mm | 2. Between tyres width | 2499 mm |
3. Height to cab upper part | 3140 mm | 3. Height to cab upper part | 3340 mm |
4. Wheelbase | 6219 mm | 4. Wheelbase | 6219 mm |
5. Rear ground clearance | 622 mm | 5. Rear ground clearance | 380 mm |
6. Front part clearance | 378 mm | 6. Front part clearance | 622 mm |