vs.

      New Holland G200 vs. John Deere JD570

      16 reasons to buy New Holland G200:

      Sizes

      Front part clearance 622 mm and 597.4 mm 4 % more or 24.6 mm

      Operation

      Each tandem case fluid volume 22.7 l. and 18.9 l. 17 % more or 3.8 l.
      Fuel Capacity 340.7 l. and 189.3 l. 44 % more or 151.4 l.
      Cooling system fluid volume 39.7 l. and 20.8 l. 48 % more or 18.9 l.
      Hydraulic system fluid volume 179.8 l. and 79.5 l. 56 % more or 100.3 l.
      Front axle standard operating weight 5102.9 kg and 2494.8 kg 51 % more or 2608.1 kg
      Rear axle standard operating weight 12014.8 kg and 5715.3 kg 52 % more or 6299.5 kg

      Motor

      Torque measured at 1600 rev / min and 1300 rev / min 19 % more or 300 rev
      Effective speeds output 7-8 152.9 kW and 61.9 kW 60 % more or 91.0 kW
      Maximum power 152.9 kW and 61.9 kW 60 % more or 91.0 kW
      Effective drives torque 7-8 881.3 Nm and 287.4 Nm 67 % more or 593.9 Nm
      Displacement 6.7 l. and 5 l. 25 % more or 1.7 l.

      Gear box

      Maximum forward speed 43 km/h and 34.4 km/h 20 % more or 8.6 km/h
      Maximum reverse gear 30.6 km/h and 10.9 km/h 64 % more or 19.7 km/h

      Front Axle

      Clearance 622 mm and 597.4 mm 4 % more or 24.6 mm

      Circle

      Maximum lifting above ground level 445 mm and 311.2 mm 30 % more or 133.8 mm

      4 reasons to buy John Deere JD570:

      Steerage

      Turn radius 5.5 m and 7289 m 100 % less or 7283.5 m

      Operation

      Circular gearbox fluid volume 5.7 l. and 2.8 l. 51 % more or 2.9 l.

      Motor

      Power measured at 2300 rev / min and 2200 rev / min 4 % more or 100 rev

      Hydraulic system

      Pump flow rate 101.8 l/min and 185.5 l/min 45 % less or 83.7 l/min

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 22 degrees

      Sizes

      Height to cab upper part 3140 mm and 3200.4 mm
      Dimensional length 8555 mm and 7415.8 mm
      Between tyres width 2650 mm and 2386.6 mm
      Wheelbase 6219 mm and 5282.2 mm
      Blade base 2562 mm and 2337.8 mm
      Dual axis wheelbase 1602 mm and 1447.8 mm

      Operation

      Tyre size 14.00x24 10 layers G2 and 13.00-24
      Operating voltage 24 V and 12 V
      Overall standard operating weight 17117.7 kg and 9197.9 kg

      Motor

      Manufacturer Cummins and John Deere
      Aspiration turbocharging and natural aspiration

      Hydraulic system

      Type of pump variable displacement piston pump and piston pump
      Overflow valve pressure 17926.4 kPa and 13789.5 kPa

      Gear box

      Transmission type Powershift transmission with direct drive and powershift
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 17.5 degrees and 20 degrees
      General fluctuations 19 degrees and 30 degrees

      Dump

      Mouldboard width 4267.2 mm and 3657.6 mm
      Mouldboard height 622 mm and 609.6 mm
      Mouldboard thickness 22 mm and 15.7 mm
      Left lateral displacement 533 mm and 679.5 mm
      Lateral right shift 711 mm and 793.8 mm

      Circle

      Diameter 1753 mm and 1371.6 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8555 mm 1. Dimensional length 7415.8 mm
      2. Between tyres width 2650 mm 2. Between tyres width 2386.6 mm
      3. Height to cab upper part 3140 mm 3. Height to cab upper part 3200.4 mm
      4. Wheelbase 6219 mm 4. Wheelbase 5282.2 mm
      6. Front part clearance 622 mm 6. Front part clearance 597.4 mm
      7. Dual axis wheelbase 1602 mm 7. Dual axis wheelbase 1447.8 mm
      8. Blade base 2562 mm 8. Blade base 2337.8 mm