vs.

      New Holland RG140.B vs. New Holland F156.6

      12 reasons to buy New Holland RG140.B:

      Steerage

      Turn radius 7250 m and 8250 m 12 % less or 1000 m

      Sizes

      Rear ground clearance 378 mm and 328 mm 13 % more or 50 mm

      Operation

      Fuel Capacity 341 l. and 275 l. 19 % more or 66 l.
      Transmission fluid volume 25 l. and 21 l. 16 % more or 4 l.

      Motor

      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev

      Gear box

      Reverse gears number 4 and 3 25 % more or 1
      Maximum forward speed 42.9 km/h and 37.4 km/h 13 % more or 5.5 km/h
      Maximum reverse gear 30 km/h and 27.1 km/h 10 % more or 2.9 km/h
      Forward gears number 8 and 6 25 % more or 2

      Dump

      Maximum cutting depth 711 mm and 500 mm 30 % more or 211 mm

      Circle

      Maximum radius outside left tyres 1978 mm and 2520 mm 22 % less or 542 mm
      Right maximum radius outside tyres 2174 mm and 3210 mm 32 % less or 1036 mm

      11 reasons to buy New Holland F156.6:

      Operation

      Front axle standard operating weight 4496 kg and 3700 kg 18 % more or 796 kg
      Front axle maximum operating weight 5200 kg and 3700 kg 29 % more or 1500 kg
      Rear axle standard operating weight 9841 kg and 9707 kg 1 % more or 134 kg
      Rear axle maximum operating weight 11500 kg and 9807 kg 15 % more or 1693 kg
      Hydraulic system fluid volume 185 l. and 180 l. 3 % more or 5 l.
      Each tandem case fluid volume 68 l. and 29 l. 57 % more or 39 l.

      Motor

      Effective speeds output 5-6 130.5 kW and 104.4 kW 20 % more or 26.1 kW
      Maximum power 130.5 kW and 104.4 kW 20 % more or 26.1 kW

      Hydraulic system

      Pump flow rate 126 l/min and 191.2 l/min 34 % less or 65.2 l/min

      Front Axle

      Clearance 646 mm and 610 mm 6 % more or 36 mm

      Circle

      Maximum lifting above ground level 480 mm and 445 mm 7 % more or 35 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 28 degrees

      Sizes

      Height to cab upper part 3140 mm and 3373 mm
      Blade base 2562 mm and 2504 mm
      Dimensional length 8521 mm and 9975 mm
      Dual axis wheelbase 1594 mm and 1544 mm
      Between tyres width 2512 mm and 2595 mm
      Wheelbase 6219 mm and 5983 mm

      Operation

      Overall standard operating weight 13506 kg and 14336 kg
      Total maximum operating weight 13506 kg and 16200 kg
      Tyre size 14x24 12 layers G2 and 17.5R25EM
      Operating voltage 24 V and 24 V
      Generator current strength 70 amperes and 70 amperes

      Motor

      Model Cummins 6A 5.9 and CNH 4-stroke cycle, naturally aspirated diesel engine
      Cylinders number 6 and 6
      Displacement 5.9 l. and 5.9 l.
      Aspiration turbocharging and turbocharging water cooling

      Hydraulic system

      Overflow valve pressure 17926.4 kPa and 20000 kPa
      Type of pump variable displacement piston pump with load sensing and Axial cam pump, variable displacement piston pump

      Gear box

      Transmission type powershift transmission with direct drive and powershift transmission

      Front Axle

      Wheel tilt 25 degrees and 21 degrees
      General fluctuations 20 degrees and 15 degrees

      Dump

      Lateral right shift 686 mm and 755 mm
      Mouldboard width 3658 mm and 3660 mm
      Mouldboard height 622 mm and 152 mm
      Mouldboard thickness 22 mm and 19 mm
      Left lateral displacement 533 mm and 645 mm

      Circle

      Rotating 360 degrees and degrees

      Images

      Sizes

      8. Blade base 2562 mm 8. Blade base 2504 mm
      1. Dimensional length 8521 mm 1. Dimensional length 9975 mm
      2. Between tyres width 2512 mm 2. Between tyres width 2595 mm
      3. Height to cab upper part 3140 mm 3. Height to cab upper part 3373 mm
      4. Wheelbase 6219 mm 4. Wheelbase 5983 mm
      5. Rear ground clearance 378 mm 5. Rear ground clearance 328 mm
      7. Dual axis wheelbase 1594 mm 7. Dual axis wheelbase 1544 mm