- Home/
- Comparison/
- Grader/
- Sany PQ160III vs. John Deere 670D
Sany PQ160III vs. John Deere 670D
8 reasons to buy Sany PQ160III:
Steerage
Turn radius | 3.1 m and 7 m | 56 % less or 3.9 m |
Motor
Effective speeds output 1-2 | 129 kW and 108 kW | 16 % more or 21 kW |
Power measured at | 2200 rev / min and 2000 rev / min | 9 % more or 200 rev |
Maximum power | 173 kW and 138 kW | 20 % more or 35 kW |
Circle
Maximum radius outside left tyres | 59 mm and 2100 mm | 97 % less or 2041 mm |
Right maximum radius outside tyres | 58 mm and 2080 mm | 97 % less or 2022 mm |
Blade tilt front angle | 90 degrees and 42 degrees | 53 % more or 48 degrees |
Blade tilt rear angle | 90 degrees and 5 degrees | 94 % more or 85 degrees |
4 reasons to buy John Deere 670D:
Gear box
Maximum forward speed | 40 km/h and 32 km/h | 20 % more or 8 km/h |
Reverse gears number | 8 and 3 | 62 % more or 5 |
Maximum reverse gear | 40 km/h and 32 km/h | 20 % more or 8 km/h |
Forward gears number | 8 and 6 | 25 % more or 2 |
Neutral reasons:
Sizes
Dimensional length | 3660 mm and 8804 mm |
Between tyres width | 2740 mm and 2510 mm |
Height to cab upper part | 3218 mm and 3180 mm |
Operation
Overall standard operating weight | 14000 kg and 14519 kg |
Motor
Cylinders number | 6 and 6 |
Manufacturer | Cummins and John Deere |
Model | QSB6.7-C173 and 6068H |
Gear box
Transmission type | Hydro-Static Transmission and Powershift transmission with direct drive |
Front Axle
Wheel tilt | 17 degrees and 20 degrees |
General fluctuations | 15 degrees and 32 degrees |
Dump
Mouldboard width | 3660 mm and 3660 mm |
Mouldboard height | 610 mm and 610 mm |
Mouldboard thickness | 22 mm and 22 mm |
Circle
Maximum lifting above ground level | 470 mm and 470 mm |
Images
Sizes
1. Dimensional length | 3660 mm | 1. Dimensional length | 8804 mm |
2. Between tyres width | 2740 mm | 2. Between tyres width | 2510 mm |
3. Height to cab upper part | 3218 mm | 3. Height to cab upper part | 3180 mm |