- Home/
- Comparison/
- Grader/
- Volvo G60 vs. John Deere 672A
Volvo G60 vs. John Deere 672A
5 reasons to buy Volvo G60:
Steerage
Turn radius | 5 m and 6.9 m | 28 % less or 1.9 m |
Motor
Power measured at | 2500 rev / min and 2300 rev / min | 8 % more or 200 rev |
Hydraulic system
Pump flow rate | 61 l/min and 142.3 l/min | 57 % less or 81.3 l/min |
Gear box
Maximum reverse gear | 32.2 km/h and 12.2 km/h | 62 % more or 20.0 km/h |
Dump
Maximum cutting depth | 254 mm and 152 mm | 40 % more or 102 mm |
9 reasons to buy John Deere 672A:
Operation
Front axle standard operating weight | 3947 kg and 1760 kg | 55 % more or 2187 kg |
Rear axle standard operating weight | 8460 kg and 4050 kg | 52 % more or 4410 kg |
Fuel Capacity | 227 l. and 148 l. | 35 % more or 79 l. |
Cooling system fluid volume | 26.5 l. and 17 l. | 36 % more or 9.5 l. |
Hydraulic system fluid volume | 143.8 l. and 114 l. | 21 % more or 29.8 l. |
Motor
Effective speeds output 7-8 | 93.2 kW and 63.4 kW | 32 % more or 29.8 kW |
Maximum power | 93.2 kW and 63.4 kW | 32 % more or 29.8 kW |
Displacement | 6.8 l. and 3.9 l. | 43 % more or 2.9 l. |
Gear box
Maximum forward speed | 38.5 km/h and 16.1 km/h | 58 % more or 22.4 km/h |
Neutral reasons:
Steerage
Left and right hinge connection | 37 degrees and 25 degrees |
Sizes
Height to cab upper part | 2896 mm and 3200 mm |
Dimensional length | 6350 mm and 8310 mm |
Between tyres width | 2184 mm and 2390 mm |
Wheelbase | 4674 mm and 5970 mm |
Blade base | 1880 mm and 2540 mm |
Operation
Overall standard operating weight | 5810 kg and 12407 kg |
Motor
Model | 4B3.9 and 6-414T |
Manufacturer | Cummins and John Deere |
Hydraulic system
Type of pump | single stream and variable displacement with locking in the middle position |
Gear box
Transmission type | hydrostatic and powershift transmission |
Dump
Left lateral displacement | 1168.4 mm and 683 mm |
Lateral right shift | 1168.4 mm and 683 mm |
Mouldboard width | 3048 mm and 3.7 mm |
Mouldboard height | 482.6 mm and 610 mm |
Mouldboard thickness | 15.9 mm and 22 mm |
Images
Sizes
2. Between tyres width | 2184 mm | 2. Between tyres width | 2390 mm |
3. Height to cab upper part | 2896 mm | 3. Height to cab upper part | 3200 mm |
4. Wheelbase | 4674 mm | 4. Wheelbase | 5970 mm |
8. Blade base | 1880 mm | 8. Blade base | 2540 mm |
1. Dimensional length | 6350 mm | 1. Dimensional length | 8310 mm |