vs.

      Volvo G710 VHP vs. John Deere 672CH

      3 reasons to buy Volvo G710 VHP:

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev
      Torque measured at 1600 rev / min and 1000 rev / min 37 % more or 600 rev

      Front Axle

      Clearance 597 mm and 559 mm 6 % more or 38 mm

      12 reasons to buy John Deere 672CH:

      Steerage

      Turn radius 6.9 m and 7.7 m 10 % less or 0.8 m

      Operation

      Front axle standard operating weight 4563 kg and 4264 kg 7 % more or 299 kg
      Rear axle standard operating weight 10095 kg and 9630 kg 5 % more or 465 kg

      Motor

      Displacement 6.8 l. and 5.9 l. 13 % more or 0.9 l.
      Effective speeds output 1-2 108 kW and 104.4 kW 3 % more or 3.6 kW
      Maximum power 147.6 kW and 104.4 kW 29 % more or 43.2 kW
      Effective drives torque 1-2 751.1 Nm and 596.6 Nm 21 % more or 154.5 Nm

      Hydraulic system

      Pump flow rate 173 l/min and 191 l/min 9 % less or 18 l/min

      Gear box

      Reverse gears number 8 and 4 50 % more or 4
      Maximum forward speed 40.2 km/h and 39.8 km/h 1 % more or 0.4 km/h
      Maximum reverse gear 40.2 km/h and 28.5 km/h 29 % more or 11.7 km/h

      Dump

      Blade pulling at maximum weight 17827 kg and 8667.7 kg 51 % more or 9159.3 kg

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 25 degrees

      Sizes

      Dimensional length 8458 mm and 8580 mm
      Between tyres width 2489 mm and 2460 mm
      Wheelbase 6096 mm and 5970 mm
      Blade base 2616 mm and 2670 mm

      Operation

      Overall standard operating weight 13894 kg and 14658 kg

      Motor

      Aspiration turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator)
      Manufacturer Cummins and John Deere
      Model 6B5.9 and 6068H
      Cylinders number 6 and 6

      Hydraulic system

      Overflow valve pressure 17236.9 kPa and 17581.6 kPa
      Type of pump hydraulic system with load sensing and Closed center variable displacement piston pump

      Gear box

      Transmission type Volvo 8400 and powershift
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 20 degrees
      General fluctuations 16 degrees and 32 degrees

      Dump

      Mouldboard width 3658 mm and 3.7 mm
      Mouldboard height 635 mm and 610 mm
      Mouldboard thickness 22.2 mm and 22 mm
      Left lateral displacement 774.7 mm and 683 mm
      Lateral right shift 774.7 mm and 683 mm

      Circle

      Diameter 1683 mm and 1520 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8458 mm 1. Dimensional length 8580 mm
      2. Between tyres width 2489 mm 2. Between tyres width 2460 mm
      4. Wheelbase 6096 mm 4. Wheelbase 5970 mm
      8. Blade base 2616 mm 8. Blade base 2670 mm