- Home/
- Comparison/
- Grader/
- Volvo G710 vs. Volvo G990
Volvo G710 vs. Volvo G990
5 reasons to buy Volvo G710:
Steerage
Turn radius | 7.7 m and 8150 m | 100 % less or 8142.3 m |
Motor
Power measured at | 2200 rev / min and 1700 rev / min | 23 % more or 500 rev |
Torque measured at | 1600 rev / min and 1550 rev / min | 3 % more or 50 rev |
Hydraulic system
Pump flow rate | 191 l/min and 208 l/min | 8 % less or 17 l/min |
Dump
Maximum cutting depth | 826 mm and 825 mm | 0 % more or 1 mm |
10 reasons to buy Volvo G990:
Operation
Front axle standard operating weight | 6200 kg and 4264 kg | 31 % more or 1936 kg |
Rear axle standard operating weight | 15900 kg and 9630 kg | 39 % more or 6270 kg |
Motor
Effective speeds output 7-8 | 206.6 kW and 104.4 kW | 49 % more or 102.2 kW |
Maximum power | 206.6 kW and 104.4 kW | 49 % more or 102.2 kW |
Effective drives torque 7-8 | 1260 Nm and 596.6 Nm | 53 % more or 663.4 Nm |
Displacement | 9.4 l. and 5.9 l. | 37 % more or 3.5 l. |
Gear box
Maximum reverse gear | 31.6 km/h and 28.5 km/h | 10 % more or 3.1 km/h |
Maximum forward speed | 44.9 km/h and 39.8 km/h | 11 % more or 5.1 km/h |
Front Axle
Clearance | 615 mm and 597 mm | 3 % more or 18 mm |
Dump
Blade pulling at maximum weight | 17145 kg and 8667.7 kg | 49 % more or 8477.3 kg |
Neutral reasons:
Steerage
Left and right hinge connection | 22 degrees and 21 degrees |
Sizes
Dimensional length | 8458 mm and 9730 mm |
Between tyres width | 2489 mm and 2800 mm |
Wheelbase | 6096 mm and 6681 mm |
Blade base | 2616 mm and 2935 mm |
Operation
Overall standard operating weight | 13894 kg and 22100 kg |
Motor
Model | 6B5.9 and D9B |
Cylinders number | 6 and 6 |
Manufacturer | Cummins and Volvo |
Aspiration | turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator) |
Hydraulic system
Type of pump | hydraulic system with load sensing and axial piston pump |
Overflow valve pressure | 17236.9 kPa and 20684.3 kPa |
Gear box
Transmission type | Volvo 8400 and HTE 840, Sequential direct drive gearbox with shifting under load Volvo |
Forward gears number | 8 and 8 |
Reverse gears number | 4 and 4 |
Front Axle
General fluctuations | 16 degrees and 16 degrees |
Wheel tilt | 18 degrees and 18 degrees |
Dump
Lowered blade pressure | 7481.6 kg and 11058 kg |
Mouldboard width | 3658 mm and 4267.2 mm |
Mouldboard height | 635 mm and 787 mm |
Mouldboard thickness | 22.2 mm and 25 mm |
Left lateral displacement | 774.7 mm and 673 mm |
Lateral right shift | 774.7 mm and 673 mm |
Circle
Diameter | 1683 mm and 1626 mm |
Rotating | 360 degrees and 360 degrees |
Images
Sizes
4. Wheelbase | 6096 mm | 4. Wheelbase | 6681 mm |
8. Blade base | 2616 mm | 8. Blade base | 2935 mm |
1. Dimensional length | 8458 mm | 1. Dimensional length | 9730 mm |
2. Between tyres width | 2489 mm | 2. Between tyres width | 2800 mm |