vs.

      Volvo G726 VHP vs. Volvo G746B

      4 reasons to buy Volvo G726 VHP:

      Operation

      Cooling system fluid volume 47 l. and 31 l. 34 % more or 16 l.

      Hydraulic system

      Pump flow rate 191 l/min and 284 l/min 33 % less or 93 l/min

      Gear box

      Maximum forward speed 45.9 km/h and 43.8 km/h 5 % more or 2.1 km/h
      Maximum reverse gear 32.8 km/h and 31.4 km/h 4 % more or 1.4 km/h

      10 reasons to buy Volvo G746B:

      Operation

      Hydraulic system fluid volume 134 l. and 90 l. 33 % more or 44 l.
      Generator current strength 80 amperes and 75 amperes 6 % more or 5 amperes
      Front axle standard operating weight 5205 kg and 4539.1 kg 13 % more or 665.9 kg
      Rear axle standard operating weight 12145 kg and 10678.9 kg 12 % more or 1466.1 kg
      Fuel Capacity 454 l. and 378.5 l. 17 % more or 75.5 l.

      Motor

      Effective speeds output 7-8 181.2 kW and 145.4 kW 20 % more or 35.8 kW
      Maximum power 181.2 kW and 145.4 kW 20 % more or 35.8 kW
      Effective drives torque 7-8 1147 Nm and 862.3 Nm 25 % more or 284.7 Nm
      Displacement 9.6 l. and 8.3 l. 14 % more or 1.3 l.

      Dump

      Blade pulling at maximum weight 10930.7 kg and 9611.2 kg 12 % more or 1319.5 kg

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 22 degrees

      Sizes

      Height to cab upper part 3099 mm and 3099 mm
      Dimensional length 8484 mm and 9220 mm
      Between tyres width 2540 mm and 2540 mm
      Wheelbase 6096 mm and 2718 mm
      Blade base 2591 mm and 2718 mm

      Operation

      Rear differential/final drive fluid volume 23 l. and 23 l.
      Transmission fluid volume 38 l. and 38 l.
      Each tandem case fluid volume 100 l. and 100 l.
      Tyre size 14.00 x 24, G-2 and 14.00 x 24, G-2
      Operating voltage 12 V and 24 V
      Overall standard operating weight 15218 kg and 17350 kg

      Motor

      Manufacturer Cummins and Volvo
      Model 6C8.3 and D10BGAE2
      Aspiration turbocharging and turbocharging

      Hydraulic system

      Type of pump hydraulic system with load sensing and hydraulic system with load sensing
      Overflow valve pressure 17236.9 kPa and 18615.8 kPa

      Gear box

      Transmission type powershift transmission and powershift transmission
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 15 degrees and 15 degrees
      General fluctuations 16 degrees and 16 degrees
      Clearance 610 mm and 610 mm

      Dump

      Mouldboard width 3657.6 mm and 3657.6 mm
      Mouldboard height 635 mm and 736.6 mm
      Mouldboard thickness 22.2 mm and 25.4 mm
      Maximum cutting depth 812.8 mm and 812.8 mm
      Left lateral displacement 673.1 mm and 673.1 mm
      Lateral right shift 673.1 mm and 673.1 mm
      Lowered blade pressure 7893.9 kg and 9211.6 kg

      Circle

      Left shift 774.7 mm and 774.7 mm
      Right shift 749.3 mm and 749.3 mm
      Maximum radius outside left tyres 2019.3 mm and 2019.3 mm
      Right maximum radius outside tyres 2006.6 mm and 2006.6 mm
      Maximum lifting above ground level 444.5 mm and 444.5 mm
      Blade tilt front angle 44 degrees and 44 degrees
      Blade tilt rear angle 6.5 degrees and 6.5 degrees
      Diameter 1683 mm and 1683 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8484 mm 1. Dimensional length 9220 mm
      2. Between tyres width 2540 mm 2. Between tyres width 2540 mm
      3. Height to cab upper part 3099 mm 3. Height to cab upper part 3099 mm
      4. Wheelbase 6096 mm 4. Wheelbase 2718 mm
      8. Blade base 2591 mm 8. Blade base 2718 mm