- Home/
- Comparison/
- Grader/
- Volvo G730 VHP vs. Bolinder Munktell VHK100
Volvo G730 VHP vs. Bolinder Munktell VHK100
10 reasons to buy Volvo G730 VHP:
Operation
Front axle standard operating weight | 4806 kg and 2850 kg | 41 % more or 1956 kg |
Rear axle standard operating weight | 10957 kg and 6950 kg | 37 % more or 4007 kg |
Fuel Capacity | 378.5 l. and 124.9 l. | 67 % more or 253.6 l. |
Motor
Effective speeds output 7-8 | 160.3 kW and 74.6 kW | 53 % more or 85.7 kW |
Maximum power | 160.3 kW and 74.6 kW | 53 % more or 85.7 kW |
Displacement | 8.3 l. and 6.7 l. | 19 % more or 1.6 l. |
Gear box
Maximum forward speed | 45.9 km/h and 33.8 km/h | 26 % more or 12.1 km/h |
Maximum reverse gear | 32.8 km/h and 8 km/h | 76 % more or 24.8 km/h |
Reverse gears number | 4 and 2 | 50 % more or 2 |
Dump
Blade pulling at maximum weight | 9859.3 kg and 4200 kg | 57 % more or 5659.3 kg |
4 reasons to buy Bolinder Munktell VHK100:
Front Axle
Clearance | 615 mm and 610 mm | 1 % more or 5 mm |
Circle
Right maximum radius outside tyres | 1800 mm and 2006.6 mm | 10 % less or 206.6 mm |
Maximum lifting above ground level | 470 mm and 444.5 mm | 5 % more or 25.5 mm |
Maximum radius outside left tyres | 1800 mm and 2019.3 mm | 11 % less or 219.3 mm |
Neutral reasons:
Sizes
Between tyres width | 2540 mm and 2230 mm |
Wheelbase | 6096 mm and 5500 mm |
Height to cab upper part | 3099 mm and 2950 mm |
Blade base | 2591 mm and 2420 mm |
Dimensional length | 8484 mm and 7520 mm |
Operation
Operating voltage | 24 V and 24 V |
Overall standard operating weight | 15763 kg and 9800 kg |
Tyre size | 14.00 x 24, G-2 and 13.00-24 12 layers |
Motor
Manufacturer | Cummins and Volvo |
Model | 6C8.3 and D67A |
Gear box
Forward gears number | 8 and 8 |
Front Axle
Wheel tilt | 18 degrees and 23 degrees |
Dump
Mouldboard width | 3657.6 mm and 3050 mm |
Mouldboard height | 635 mm and 610 mm |
Left lateral displacement | 673.1 mm and 840 mm |
Lateral right shift | 673.1 mm and 840 mm |
Circle
Diameter | 1683 mm and 1486 mm |
Rotating | 360 degrees and 360 degrees |
Images
Sizes
8. Blade base | 2591 mm | 8. Blade base | 2420 mm |
1. Dimensional length | 8484 mm | 1. Dimensional length | 7520 mm |
2. Between tyres width | 2540 mm | 2. Between tyres width | 2230 mm |
3. Height to cab upper part | 3099 mm | 3. Height to cab upper part | 2950 mm |
4. Wheelbase | 6096 mm | 4. Wheelbase | 5500 mm |