vs.

      Volvo G730 VHP vs. Caterpillar 140H

      13 reasons to buy Volvo G730 VHP:

      Operation

      Cooling system fluid volume 47 l. and 38 l. 19 % more or 9 l.
      Hydraulic system fluid volume 90 l. and 80 l. 11 % more or 10 l.
      Each tandem case fluid volume 100 l. and 64 l. 36 % more or 36 l.
      Front axle standard operating weight 4806 kg and 4138 kg 14 % more or 668 kg
      Rear axle standard operating weight 10957 kg and 10539 kg 4 % more or 418 kg

      Motor

      Effective speeds output 7-8 160.3 kW and 138 kW 14 % more or 22.3 kW
      Maximum power 160.3 kW and 138 kW 14 % more or 22.3 kW

      Hydraulic system

      Pump flow rate 191 l/min and 206 l/min 7 % less or 15 l/min

      Gear box

      Maximum forward speed 45.9 km/h and 44 km/h 4 % more or 1.9 km/h

      Front Axle

      Clearance 610 mm and 600 mm 2 % more or 10 mm

      Dump

      Maximum cutting depth 812.8 mm and 715 mm 12 % more or 97.8 mm

      Circle

      Blade tilt front angle 44 degrees and 40 degrees 9 % more or 4 degrees
      Blade tilt rear angle 6.5 degrees and 5 degrees 23 % more or 1.5 degrees

      9 reasons to buy Caterpillar 140H:

      Operation

      Fuel Capacity 397 l. and 378.5 l. 5 % more or 18.5 l.
      Rear differential/final drive fluid volume 47 l. and 23 l. 51 % more or 24 l.

      Motor

      Displacement 10.3 l. and 8.3 l. 19 % more or 2.0 l.

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum reverse gear 34.7 km/h and 32.8 km/h 5 % more or 1.9 km/h

      Dump

      Blade pulling at maximum weight 19135 kg and 9859.3 kg 48 % more or 9275.7 kg

      Circle

      Maximum radius outside left tyres 1896 mm and 2019.3 mm 6 % less or 123.3 mm
      Right maximum radius outside tyres 1978 mm and 2006.6 mm 1 % less or 28.6 mm
      Maximum lifting above ground level 480 mm and 444.5 mm 7 % more or 35.5 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 20 degrees

      Sizes

      Between tyres width 2540 mm and 2464 mm
      Dimensional length 8484 mm and 8713 mm
      Wheelbase 6096 mm and 6169 mm
      Blade base 2591 mm and 2561 mm
      Height to cab upper part 3099 mm and 3131 mm

      Operation

      Overall standard operating weight 15763 kg and 14677 kg

      Motor

      Model 6C8.3 and 3176C DITA ATAAC VHP
      Manufacturer Cummins and Caterpillar

      Hydraulic system

      Overflow valve pressure 17236.9 kPa and 24150 kPa
      Type of pump hydraulic system with load sensing and axial piston

      Gear box

      Transmission type powershift transmission and powershift transmission with direct drive
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 16 degrees and 32 degrees

      Dump

      Left lateral displacement 673.1 mm and 524 mm
      Lateral right shift 673.1 mm and 660 mm
      Mouldboard width 3657.6 mm and 3658 mm
      Mouldboard height 635 mm and 610 mm
      Mouldboard thickness 22.2 mm and 22 mm
      Lowered blade pressure 8357.9 kg and 13017 kg

      Circle

      Diameter 1683 mm and 1530 mm
      Left shift 774.7 mm and 695 mm
      Right shift 749.3 mm and 728 mm

      Images

      Sizes

      3. Height to cab upper part 3099 mm 3. Height to cab upper part 3131 mm
      4. Wheelbase 6096 mm 4. Wheelbase 6169 mm
      8. Blade base 2591 mm 8. Blade base 2561 mm
      1. Dimensional length 8484 mm 1. Dimensional length 8713 mm
      2. Between tyres width 2540 mm 2. Between tyres width 2464 mm