vs.

      Volvo G740 VHP vs. New Holland F140

      12 reasons to buy Volvo G740 VHP:

      Operation

      Fuel Capacity 378.5 l. and 340 l. 10 % more or 38.5 l.
      Cooling system fluid volume 50 l. and 40 l. 20 % more or 10 l.
      Transmission fluid volume 38 l. and 25 l. 34 % more or 13 l.
      Each tandem case fluid volume 100 l. and 30 l. 70 % more or 70 l.
      Generator current strength 75 amperes and 70 amperes 7 % more or 5 amperes

      Motor

      Effective drives torque 7-8 1145.7 Nm and 141 Nm 88 % more or 1004.7 Nm
      Displacement 10.8 l. and 5.9 l. 45 % more or 4.9 l.

      Hydraulic system

      Pump flow rate 183 l/min and 192 l/min 5 % less or 9 l/min

      Gear box

      Maximum forward speed 43.8 km/h and 43 km/h 2 % more or 0.8 km/h
      Maximum reverse gear 31.4 km/h and 28.5 km/h 9 % more or 2.9 km/h

      Dump

      Maximum cutting depth 800.1 mm and 712 mm 11 % more or 88.1 mm

      Circle

      Blade tilt front angle 44 degrees and 40 degrees 9 % more or 4 degrees

      7 reasons to buy New Holland F140:

      Operation

      Hydraulic system fluid volume 94.6 l. and 90 l. 5 % more or 4.6 l.

      Motor

      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev

      Front Axle

      Clearance 622 mm and 610 mm 2 % more or 12 mm

      Circle

      Maximum radius outside left tyres 1582 mm and 2019.3 mm 22 % less or 437.3 mm
      Right maximum radius outside tyres 1742 mm and 2006.6 mm 13 % less or 264.6 mm
      Maximum lifting above ground level 444 mm and 436.9 mm 2 % more or 7.1 mm
      Blade tilt rear angle 5 degrees and 2.5 degrees 50 % more or 2.5 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 25 degrees

      Sizes

      Dimensional length 8636 mm and 8521 mm
      Between tyres width 2540 mm and 2510 mm
      Wheelbase 6248 mm and 6219 mm
      Blade base 2718 mm and 2562 mm
      Height to cab upper part 3099 mm and 3340 mm

      Operation

      Tyre size 14.00 x 24, G-2 and 13.00 x 24 (12PR)
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer Cummins and Cummins
      Model M11 and 6BTA5.9 1 level
      Aspiration turbocharging and turbocharging

      Hydraulic system

      Type of pump hydraulic system with load sensing and full hydraulic system with load sensing
      Overflow valve pressure 17236.9 kPa and 17900 kPa

      Gear box

      Transmission type powershift transmission and Powershift transmission with direct drive
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 16 degrees and 19 degrees

      Dump

      Mouldboard thickness 25.4 mm and 22 mm
      Left lateral displacement 673.1 mm and 533 mm
      Lateral right shift 673.1 mm and 686 mm
      Lowered blade pressure 8574.7 kg and 8636 kg
      Mouldboard width 4572 mm and 3658 mm
      Mouldboard height 736.6 mm and 622 mm

      Circle

      Rotating 360 degrees and 360 degrees
      Diameter 1683 mm and 1753 mm

      Images

      Sizes

      1. Dimensional length 8636 mm 1. Dimensional length 8521 mm
      2. Between tyres width 2540 mm 2. Between tyres width 2510 mm
      3. Height to cab upper part 3099 mm 3. Height to cab upper part 3340 mm
      4. Wheelbase 6248 mm 4. Wheelbase 6219 mm
      8. Blade base 2718 mm 8. Blade base 2562 mm