vs.

      Volvo G740 vs. Volvo G780B

      9 reasons to buy Volvo G740:

      Operation

      Cooling system fluid volume 50 l. and 31 l. 38 % more or 19 l.

      Motor

      Displacement 10.8 l. and 9.6 l. 11 % more or 1.2 l.
      Torque measured at 1300 rev / min and 1100 rev / min 15 % more or 200 rev

      Hydraulic system

      Pump flow rate 183 l/min and 284 l/min 36 % less or 101 l/min

      Gear box

      Maximum forward speed 43.8 km/h and 38.3 km/h 13 % more or 5.5 km/h
      Maximum reverse gear 31.4 km/h and 27.4 km/h 13 % more or 4.0 km/h

      Circle

      Maximum radius outside left tyres 2019.3 mm and 2311.4 mm 13 % less or 292.1 mm
      Right maximum radius outside tyres 2006.6 mm and 2298.7 mm 13 % less or 292.1 mm
      Maximum lifting above ground level 436.9 mm and 431.8 mm 1 % more or 5.1 mm

      15 reasons to buy Volvo G780B:

      Operation

      Rear axle standard operating weight 13733 kg and 11302 kg 18 % more or 2431 kg
      Fuel Capacity 454 l. and 378.5 l. 17 % more or 75.5 l.
      Front axle standard operating weight 5825 kg and 4851 kg 17 % more or 974 kg
      Hydraulic system fluid volume 134 l. and 90 l. 33 % more or 44 l.
      Rear differential/final drive fluid volume 34 l. and 23 l. 32 % more or 11 l.
      Each tandem case fluid volume 105 l. and 100 l. 5 % more or 5 l.
      Generator current strength 80 amperes and 75 amperes 6 % more or 5 amperes

      Motor

      Effective speeds output 7-8 181.2 kW and 156.6 kW 14 % more or 24.6 kW
      Maximum power 181.2 kW and 156.6 kW 14 % more or 24.6 kW
      Effective drives torque 7-8 1147 Nm and 1030.4 Nm 10 % more or 116.6 Nm

      Front Axle

      Clearance 698 mm and 610 mm 13 % more or 88 mm

      Dump

      Blade pulling at maximum weight 12359.5 kg and 10171.4 kg 18 % more or 2188.1 kg
      Maximum cutting depth 838.2 mm and 800.1 mm 5 % more or 38.1 mm

      Circle

      Blade tilt front angle 46 degrees and 44 degrees 4 % more or 2 degrees
      Blade tilt rear angle 13 degrees and 2.5 degrees 81 % more or 10.5 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 22 degrees

      Sizes

      Dimensional length 8636 mm and 9322 mm
      Height to cab upper part 3099 mm and 3200 mm
      Between tyres width 2540 mm and 2794 mm
      Wheelbase 6248 mm and 6248 mm
      Blade base 2718 mm and 2718 mm

      Operation

      Overall standard operating weight 16153 kg and 19618 kg
      Transmission fluid volume 38 l. and 38 l.
      Tyre size 14.00 x 24, G-2 and 16.00 x 24, G-2
      Operating voltage 24 V and 24 V

      Motor

      Aspiration turbocharging and turbocharging
      Manufacturer Cummins and Volvo
      Model M11 and D10BGAE2
      Power measured at 2100 rev / min and 2100 rev / min

      Hydraulic system

      Type of pump hydraulic system with load sensing and hydraulic system with load sensing
      Overflow valve pressure 17236.9 kPa and 18615.8 kPa

      Gear box

      Reverse gears number 4 and 4
      Transmission type powershift transmission and powershift transmission
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 16 degrees and 16 degrees

      Dump

      Mouldboard thickness 25.4 mm and 25.4 mm
      Lowered blade pressure 8574.7 kg and 10415.8 kg
      Left lateral displacement 673.1 mm and 673.1 mm
      Lateral right shift 673.1 mm and 673.1 mm
      Mouldboard width 4572 mm and 4267.2 mm
      Mouldboard height 736.6 mm and 787.4 mm

      Circle

      Diameter 1683 mm and 1692 mm
      Rotating 360 degrees and 360 degrees
      Left shift 774.7 mm and 762 mm
      Right shift 749.3 mm and 749.3 mm

      Images

      Sizes

      1. Dimensional length 8636 mm 1. Dimensional length 9322 mm
      2. Between tyres width 2540 mm 2. Between tyres width 2794 mm
      3. Height to cab upper part 3099 mm 3. Height to cab upper part 3200 mm
      4. Wheelbase 6248 mm 4. Wheelbase 6248 mm
      8. Blade base 2718 mm 8. Blade base 2718 mm