- Home/
- Comparison/
- Grader/
- Volvo G746B vs. John Deere 870D
Volvo G746B vs. John Deere 870D
17 reasons to buy Volvo G746B:
Operation
Front axle standard operating weight | 5205 kg and 4173 kg | 20 % more or 1032 kg |
Rear axle standard operating weight | 12145 kg and 11589 kg | 5 % more or 556 kg |
Fuel Capacity | 454 l. and 401.2 l. | 12 % more or 52.8 l. |
Each tandem case fluid volume | 100 l. and 75.7 l. | 24 % more or 24.3 l. |
Hydraulic system fluid volume | 134 l. and 53 l. | 60 % more or 81 l. |
Transmission fluid volume | 38 l. and 22.7 l. | 40 % more or 15.3 l. |
Motor
Power measured at | 2100 rev / min and 2000 rev / min | 5 % more or 100 rev |
Torque measured at | 1100 rev / min and 1000 rev / min | 9 % more or 100 rev |
Effective speeds output 7-8 | 181.2 kW and 175.2 kW | 3 % more or 6.0 kW |
Maximum power | 181.2 kW and 175.2 kW | 3 % more or 6.0 kW |
Displacement | 9.6 l. and 8.1 l. | 16 % more or 1.5 l. |
Gear box
Maximum forward speed | 43.8 km/h and 41.1 km/h | 6 % more or 2.7 km/h |
Circle
Right maximum radius outside tyres | 2006.6 mm and 2310 mm | 13 % less or 303.4 mm |
Maximum lifting above ground level | 444.5 mm and 437 mm | 2 % more or 7.5 mm |
Blade tilt front angle | 44 degrees and 42 degrees | 5 % more or 2 degrees |
Blade tilt rear angle | 6.5 degrees and 5 degrees | 23 % more or 1.5 degrees |
Maximum radius outside left tyres | 2019.3 mm and 2320 mm | 13 % less or 300.7 mm |
9 reasons to buy John Deere 870D:
Operation
Cooling system fluid volume | 49.2 l. and 31 l. | 37 % more or 18.2 l. |
Rear differential/final drive fluid volume | 36 l. and 23 l. | 36 % more or 13 l. |
Generator current strength | 100 amperes and 80 amperes | 20 % more or 20 amperes |
Motor
Effective drives torque 7-8 | 1238 Nm and 1147 Nm | 7 % more or 91 Nm |
Hydraulic system
Pump flow rate | 207 l/min and 284 l/min | 27 % less or 77 l/min |
Gear box
Reverse gears number | 8 and 4 | 50 % more or 4 |
Maximum reverse gear | 41.1 km/h and 31.4 km/h | 24 % more or 9.7 km/h |
Front Axle
Clearance | 638 mm and 610 mm | 4 % more or 28 mm |
Dump
Blade pulling at maximum weight | 13299 kg and 10930.7 kg | 18 % more or 2368.3 kg |
Neutral reasons:
Steerage
Left and right hinge connection | 22 degrees and 22 degrees |
Sizes
Between tyres width | 2540 mm and 2510 mm |
Wheelbase | 2718 mm and 6120 mm |
Blade base | 2718 mm and 2533 mm |
Height to cab upper part | 3099 mm and 3180 mm |
Dimensional length | 9220 mm and 8804 mm |
Operation
Overall standard operating weight | 17350 kg and 15760 kg |
Tyre size | 14.00 x 24, G-2 and 14.00R24 Radial PR |
Operating voltage | 24 V and 24 V |
Motor
Manufacturer | Volvo and John Deere |
Model | D10BGAE2 and 6081H |
Aspiration | turbocharging and Turbocharged engine with subsequent cooling of charging air by oncoming air flow |
Hydraulic system
Type of pump | hydraulic system with load sensing and variable displacement piston pump |
Overflow valve pressure | 18615.8 kPa and 18960.6 kPa |
Gear box
Transmission type | powershift transmission and Powershift transmission with direct drive |
Forward gears number | 8 and 8 |
Front Axle
Wheel tilt | 15 degrees and 20 degrees |
General fluctuations | 16 degrees and 32 degrees |
Dump
Mouldboard height | 736.6 mm and 686 mm |
Mouldboard thickness | 25.4 mm and 25 mm |
Left lateral displacement | 673.1 mm and 680 mm |
Lateral right shift | 673.1 mm and 680 mm |
Mouldboard width | 3657.6 mm and 4300 mm |
Circle
Diameter | 1683 mm and 1520 mm |
Rotating | 360 degrees and 360 degrees |
Left shift | 774.7 mm and 787 mm |
Right shift | 749.3 mm and 724 mm |
Images
Sizes
1. Dimensional length | 9220 mm | 1. Dimensional length | 8804 mm |
2. Between tyres width | 2540 mm | 2. Between tyres width | 2510 mm |
3. Height to cab upper part | 3099 mm | 3. Height to cab upper part | 3180 mm |
4. Wheelbase | 2718 mm | 4. Wheelbase | 6120 mm |
8. Blade base | 2718 mm | 8. Blade base | 2533 mm |