- Home/
- Comparison/
- Grader/
- Volvo G780 vs. Caterpillar 120H
Volvo G780 vs. Caterpillar 120H
16 reasons to buy Volvo G780:
Operation
Each tandem case fluid volume | 105 l. and 49 l. | 53 % more or 56 l. |
Generator current strength | 75 amperes and 35 amperes | 53 % more or 40 amperes |
Front axle standard operating weight | 6028 kg and 3574.3 kg | 41 % more or 2453.7 kg |
Rear axle standard operating weight | 13360 kg and 8944.8 kg | 33 % more or 4415.2 kg |
Fuel Capacity | 378.5 l. and 340 l. | 10 % more or 38.5 l. |
Cooling system fluid volume | 50 l. and 40 l. | 20 % more or 10 l. |
Hydraulic system fluid volume | 90 l. and 68 l. | 24 % more or 22 l. |
Motor
Power measured at | 2100 rev / min and 2000 rev / min | 5 % more or 100 rev |
Effective speeds output 7-8 | 156.6 kW and 104.4 kW | 33 % more or 52.2 kW |
Maximum power | 156.6 kW and 104.4 kW | 33 % more or 52.2 kW |
Displacement | 10.8 l. and 6.6 l. | 39 % more or 4.2 l. |
Front Axle
Clearance | 698 mm and 608 mm | 13 % more or 90 mm |
Dump
Maximum cutting depth | 838.2 mm and 775 mm | 8 % more or 63.2 mm |
Blade pulling at maximum weight | 12023.4 kg and 10661 kg | 11 % more or 1362.4 kg |
Circle
Blade tilt rear angle | 13 degrees and 5 degrees | 62 % more or 8 degrees |
Blade tilt front angle | 46 degrees and 40 degrees | 13 % more or 6 degrees |
9 reasons to buy Caterpillar 120H:
Operation
Rear differential/final drive fluid volume | 47 l. and 34 l. | 28 % more or 13 l. |
Motor
Torque measured at | 1400 rev / min and 1300 rev / min | 7 % more or 100 rev |
Hydraulic system
Pump flow rate | 148 l/min and 183 l/min | 19 % less or 35 l/min |
Gear box
Reverse gears number | 6 and 4 | 33 % more or 2 |
Maximum forward speed | 42.6 km/h and 38.3 km/h | 10 % more or 4.3 km/h |
Maximum reverse gear | 33.7 km/h and 27.4 km/h | 19 % more or 6.3 km/h |
Circle
Maximum radius outside left tyres | 1840 mm and 2311.4 mm | 20 % less or 471.4 mm |
Right maximum radius outside tyres | 1912 mm and 2298.7 mm | 17 % less or 386.7 mm |
Maximum lifting above ground level | 457 mm and 431.8 mm | 6 % more or 25.2 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 22 degrees and 20 degrees |
Sizes
Height to cab upper part | 3200 mm and 3110 mm |
Dimensional length | 8687 mm and 8140 mm |
Between tyres width | 2794 mm and 2440 mm |
Wheelbase | 6248 mm and 5870 mm |
Operation
Tyre size | 16.00 x 24, G-2 and 13-24 (10 PR) (G-2) |
Operating voltage | 24 V and 24 V |
Overall standard operating weight | 19388 kg and 11358 kg |
Motor
Manufacturer | Cummins and Caterpillar |
Model | M11 and 3116 DITA |
Aspiration | turbocharging and turbocharging |
Hydraulic system
Overflow valve pressure | 17236.9 kPa and 24131.6 kPa |
Type of pump | hydraulic system with load sensing and Axial-piston pump |
Gear box
Transmission type | powershift transmission and direct drive, powershift |
Forward gears number | 8 and 8 |
Front Axle
Wheel tilt | 18 degrees and 18 degrees |
General fluctuations | 16 degrees and 32 degrees |
Dump
Lowered blade pressure | 10652.6 kg and 9100 kg |
Mouldboard width | 4267.2 mm and 3660 mm |
Mouldboard height | 787.4 mm and 610 mm |
Mouldboard thickness | 25.4 mm and 22 mm |
Left lateral displacement | 673.1 mm and 524 mm |
Lateral right shift | 673.1 mm and 660 mm |
Circle
Diameter | 1692 mm and 1530 mm |
Rotating | 360 degrees and 360 degrees |
Left shift | 762 mm and 625 mm |
Right shift | 749.3 mm and 628 mm |
Images
Sizes
1. Dimensional length | 8687 mm | 1. Dimensional length | 8140 mm |
2. Between tyres width | 2794 mm | 2. Between tyres width | 2440 mm |
3. Height to cab upper part | 3200 mm | 3. Height to cab upper part | 3110 mm |
4. Wheelbase | 6248 mm | 4. Wheelbase | 5870 mm |