- Home/
- Comparison/
- Grader/
- Volvo G780B vs. John Deere 672D
Volvo G780B vs. John Deere 672D
15 reasons to buy Volvo G780B:
Operation
Rear axle standard operating weight | 13733 kg and 10895 kg | 21 % more or 2838 kg |
Fuel Capacity | 454 l. and 401.2 l. | 12 % more or 52.8 l. |
Hydraulic system fluid volume | 134 l. and 53 l. | 60 % more or 81 l. |
Front axle standard operating weight | 5825 kg and 4358 kg | 25 % more or 1467 kg |
Transmission fluid volume | 38 l. and 22.7 l. | 40 % more or 15.3 l. |
Each tandem case fluid volume | 105 l. and 75.7 l. | 28 % more or 29.3 l. |
Motor
Effective drives torque 7-8 | 1147 Nm and 847.4 Nm | 26 % more or 299.6 Nm |
Displacement | 9.6 l. and 6.8 l. | 29 % more or 2.8 l. |
Power measured at | 2100 rev / min and 2000 rev / min | 5 % more or 100 rev |
Torque measured at | 1100 rev / min and 1000 rev / min | 9 % more or 100 rev |
Effective speeds output 7-8 | 181.2 kW and 138 kW | 24 % more or 43.2 kW |
Maximum power | 181.2 kW and 138 kW | 24 % more or 43.2 kW |
Front Axle
Clearance | 698 mm and 587 mm | 16 % more or 111 mm |
Circle
Blade tilt front angle | 46 degrees and 42 degrees | 9 % more or 4 degrees |
Blade tilt rear angle | 13 degrees and 5 degrees | 62 % more or 8 degrees |
11 reasons to buy John Deere 672D:
Operation
Generator current strength | 100 amperes and 80 amperes | 20 % more or 20 amperes |
Cooling system fluid volume | 45.4 l. and 31 l. | 32 % more or 14.4 l. |
Rear differential/final drive fluid volume | 36 l. and 34 l. | 6 % more or 2 l. |
Hydraulic system
Pump flow rate | 207 l/min and 284 l/min | 27 % less or 77 l/min |
Gear box
Maximum reverse gear | 40 km/h and 27.4 km/h | 31 % more or 12.6 km/h |
Reverse gears number | 8 and 4 | 50 % more or 4 |
Maximum forward speed | 40 km/h and 38.3 km/h | 4 % more or 1.7 km/h |
Dump
Blade pulling at maximum weight | 19105 kg and 12359.5 kg | 35 % more or 6745.5 kg |
Circle
Maximum radius outside left tyres | 2100 mm and 2311.4 mm | 9 % less or 211.4 mm |
Right maximum radius outside tyres | 2080 mm and 2298.7 mm | 10 % less or 218.7 mm |
Maximum lifting above ground level | 470 mm and 431.8 mm | 8 % more or 38.2 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 22 degrees and 22 degrees |
Sizes
Between tyres width | 2794 mm and 2490 mm |
Wheelbase | 6248 mm and 6120 mm |
Blade base | 2718 mm and 2568 mm |
Height to cab upper part | 3200 mm and 3180 mm |
Dimensional length | 9322 mm and 8804 mm |
Operation
Tyre size | 16.00 x 24, G-2 and 14.00R24 Radial PR |
Overall standard operating weight | 19618 kg and 15254 kg |
Operating voltage | 24 V and 24 V |
Motor
Aspiration | turbocharging and Turbocharged engine with subsequent cooling of charging air by oncoming air flow |
Manufacturer | Volvo and John Deere |
Model | D10BGAE2 and 6068H |
Cylinders number | 6 and 6 |
Hydraulic system
Type of pump | hydraulic system with load sensing and variable displacement piston pump |
Overflow valve pressure | 18615.8 kPa and 18960.6 kPa |
Gear box
Transmission type | powershift transmission and Powershift transmission with direct drive |
Forward gears number | 8 and 8 |
Front Axle
Wheel tilt | 18 degrees and 20 degrees |
General fluctuations | 16 degrees and 32 degrees |
Dump
Mouldboard height | 787.4 mm and 610 mm |
Mouldboard thickness | 25.4 mm and 22 mm |
Left lateral displacement | 673.1 mm and 680 mm |
Lateral right shift | 673.1 mm and 680 mm |
Mouldboard width | 4267.2 mm and 3660 mm |
Circle
Diameter | 1692 mm and 1520 mm |
Rotating | 360 degrees and 360 degrees |
Left shift | 762 mm and 787 mm |
Right shift | 749.3 mm and 724 mm |
Images
Sizes
1. Dimensional length | 9322 mm | 1. Dimensional length | 8804 mm |
2. Between tyres width | 2794 mm | 2. Between tyres width | 2490 mm |
3. Height to cab upper part | 3200 mm | 3. Height to cab upper part | 3180 mm |
4. Wheelbase | 6248 mm | 4. Wheelbase | 6120 mm |
8. Blade base | 2718 mm | 8. Blade base | 2568 mm |