vs.

      Volvo G86 vs. Volvo G940

      4 reasons to buy Volvo G86:

      Steerage

      Turn radius 5 m and 7265 m 100 % less or 7260 m

      Operation

      Hydraulic system fluid volume 114 l. and 91 l. 20 % more or 23 l.

      Motor

      Power measured at 2500 rev / min and 1800 rev / min 28 % more or 700 rev

      Hydraulic system

      Pump flow rate 91 l/min and 208 l/min 56 % less or 117 l/min

      12 reasons to buy Volvo G940:

      Operation

      Front axle standard operating weight 4700 kg and 2400 kg 49 % more or 2300 kg
      Rear axle standard operating weight 11700 kg and 4630 kg 60 % more or 7070 kg
      Fuel Capacity 404 l. and 148 l. 63 % more or 256 l.
      Cooling system fluid volume 31 l. and 17 l. 45 % more or 14 l.
      Each tandem case fluid volume 100 l. and 68 l. 32 % more or 32 l.

      Motor

      Maximum power 167.8 kW and 63.4 kW 62 % more or 104.4 kW
      Displacement 7.2 l. and 3.9 l. 46 % more or 3.3 l.
      Effective speeds output 7-8 167.8 kW and 63.4 kW 62 % more or 104.4 kW
      Cylinders number 6 and 4 33 % more or 2

      Gear box

      Maximum forward speed 45.4 km/h and 32 km/h 30 % more or 13.4 km/h

      Front Axle

      Clearance 610 mm and 406 mm 33 % more or 204 mm

      Dump

      Maximum cutting depth 787.4 mm and 203 mm 74 % more or 584.4 mm

      Neutral reasons:

      Sizes

      Dimensional length 6350 mm and 9150 mm
      Between tyres width 2362 mm and 2537 mm
      Wheelbase 4674 mm and 6280 mm
      Blade base 1880 mm and 2650 mm

      Operation

      Tyre size 15X19.5, TL, G-2 and 14:00 x 24, G-2
      Overall standard operating weight 7030 kg and 16400 kg

      Motor

      Model 4B3.9 and D7E
      Manufacturer Cummins and Volvo

      Hydraulic system

      Type of pump single stream and axial piston pump
      Overflow valve pressure 12410.6 kPa and 20684.3 kPa

      Gear box

      Transmission type hydrostatic and HTE840, Sequential direct drive gearbox with shifting under load Volvo
      Maximum reverse gear 32 km/h and 32 km/h

      Front Axle

      Wheel tilt 15 degrees and 18 degrees
      General fluctuations 35 degrees and 16 degrees

      Dump

      Mouldboard height 482.6 mm and 635 mm
      Mouldboard thickness 15.9 mm and 22 mm
      Left lateral displacement 1473.2 mm and 673 mm
      Lateral right shift 1473.2 mm and 673 mm
      Mouldboard width 3048 mm and 3657.6 mm

      Circle

      Diameter 990.6 mm and 1626 mm
      Rotating 120 degrees and 360 degrees

      Images

      Sizes

      4. Wheelbase 4674 mm 4. Wheelbase 6280 mm
      8. Blade base 1880 mm 8. Blade base 2650 mm
      1. Dimensional length 6350 mm 1. Dimensional length 9150 mm
      2. Between tyres width 2362 mm 2. Between tyres width 2537 mm