vs.

      Volvo G940 vs. John Deere 870D

      13 reasons to buy Volvo G940:

      Operation

      Hydraulic system fluid volume 91 l. and 53 l. 42 % more or 38 l.
      Front axle maximum operating weight 7570 kg and 7268 kg 4 % more or 302 kg
      Transmission fluid volume 61 l. and 22.7 l. 63 % more or 38.3 l.
      Each tandem case fluid volume 100 l. and 75.7 l. 24 % more or 24.3 l.
      Fuel Capacity 404 l. and 401.2 l. 1 % more or 2.8 l.
      Front axle standard operating weight 4700 kg and 4173 kg 11 % more or 527 kg
      Rear axle standard operating weight 11700 kg and 11589 kg 1 % more or 111 kg

      Motor

      Torque measured at 1550 rev / min and 1000 rev / min 35 % more or 550 rev

      Gear box

      Maximum forward speed 45.4 km/h and 41.1 km/h 9 % more or 4.3 km/h

      Circle

      Right maximum radius outside tyres 2010 mm and 2310 mm 13 % less or 300 mm
      Blade tilt front angle 45 degrees and 42 degrees 7 % more or 3 degrees
      Blade tilt rear angle 6 degrees and 5 degrees 17 % more or 1 degrees
      Maximum radius outside left tyres 2020 mm and 2320 mm 13 % less or 300 mm

      15 reasons to buy John Deere 870D:

      Steerage

      Turn radius 7 m and 7265 m 100 % less or 7258 m

      Sizes

      Front part clearance 638 mm and 610 mm 4 % more or 28 mm

      Operation

      Cooling system fluid volume 49.2 l. and 31 l. 37 % more or 18.2 l.
      Rear axle maximum operating weight 14777 kg and 14240 kg 4 % more or 537 kg
      Generator current strength 100 amperes and 80 amperes 20 % more or 20 amperes

      Motor

      Effective speeds output 7-8 175.2 kW and 167.8 kW 4 % more or 7.4 kW
      Maximum power 175.2 kW and 167.8 kW 4 % more or 7.4 kW
      Effective drives torque 7-8 1238 Nm and 1023 Nm 17 % more or 215 Nm
      Displacement 8.1 l. and 7.2 l. 11 % more or 0.9 l.
      Power measured at 2000 rev / min and 1800 rev / min 10 % more or 200 rev

      Hydraulic system

      Pump flow rate 207 l/min and 208 l/min 0 % less or 1 l/min

      Gear box

      Reverse gears number 8 and 4 50 % more or 4
      Maximum reverse gear 41.1 km/h and 32 km/h 22 % more or 9.1 km/h

      Front Axle

      Clearance 638 mm and 610 mm 4 % more or 28 mm

      Dump

      Blade pulling at maximum weight 13299 kg and 12816 kg 4 % more or 483 kg

      Neutral reasons:

      Sizes

      Wheelbase 6280 mm and 6120 mm
      Blade base 2650 mm and 2533 mm
      Height to cab upper part 3225 mm and 3180 mm
      Dimensional length 9150 mm and 8804 mm
      Between tyres width 2537 mm and 2510 mm

      Operation

      Overall standard operating weight 16400 kg and 15760 kg
      Total maximum operating weight 21320 kg and 22045 kg
      Tyre size 14:00 x 24, G-2 and 14.00R24 Radial PR
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer Volvo and John Deere
      Model D7E and 6081H
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and Turbocharged engine with subsequent cooling of charging air by oncoming air flow
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump axial piston pump and variable displacement piston pump
      Overflow valve pressure 20684.3 kPa and 18960.6 kPa

      Gear box

      Transmission type HTE840, Sequential direct drive gearbox with shifting under load Volvo and Powershift transmission with direct drive
      Forward gears number 8 and 8

      Front Axle

      General fluctuations 16 degrees and 32 degrees
      Wheel tilt 18 degrees and 20 degrees

      Dump

      Mouldboard thickness 22 mm and 25 mm
      Left lateral displacement 673 mm and 680 mm
      Lateral right shift 673 mm and 680 mm
      Mouldboard width 3657.6 mm and 4300 mm
      Mouldboard height 635 mm and 686 mm

      Circle

      Diameter 1626 mm and 1520 mm
      Rotating 360 degrees and 360 degrees
      Left shift 775 mm and 787 mm
      Right shift 749 mm and 724 mm

      Images

      Sizes

      1. Dimensional length 9150 mm 1. Dimensional length 8804 mm
      2. Between tyres width 2537 mm 2. Between tyres width 2510 mm
      3. Height to cab upper part 3225 mm 3. Height to cab upper part 3180 mm
      4. Wheelbase 6280 mm 4. Wheelbase 6120 mm
      6. Front part clearance 610 mm 6. Front part clearance 638 mm
      8. Blade base 2650 mm 8. Blade base 2533 mm