- Home/
- Comparison/
- Grader/
- Volvo G946 vs. Caterpillar 16H ES
Volvo G946 vs. Caterpillar 16H ES
4 reasons to buy Volvo G946:
Operation
Generator current strength | 80 amperes and 50 amperes | 37 % more or 30 amperes |
Hydraulic system fluid volume | 144 l. and 130 l. | 10 % more or 14 l. |
Hydraulic system
Pump flow rate | 208 l/min and 243 l/min | 14 % less or 35 l/min |
Gear box
Maximum forward speed | 45.4 km/h and 44.5 km/h | 2 % more or 0.9 km/h |
7 reasons to buy Caterpillar 16H ES:
Steerage
Turn radius | 8.2 m and 7265 m | 100 % less or 7256.8 m |
Operation
Fuel Capacity | 492 l. and 404 l. | 18 % more or 88 l. |
Motor
Effective speeds output 7-8 | 205.1 kW and 167.8 kW | 18 % more or 37.3 kW |
Maximum power | 205.1 kW and 167.8 kW | 18 % more or 37.3 kW |
Displacement | 14.6 l. and 7.2 l. | 51 % more or 7.4 l. |
Gear box
Reverse gears number | 8 and 4 | 50 % more or 4 |
Maximum reverse gear | 42.3 km/h and 32 km/h | 24 % more or 10.3 km/h |
Neutral reasons:
Steerage
Left and right hinge connection | 23 degrees and 20 degrees |
Sizes
Height to cab upper part | 3225 mm and 3520 mm |
Dimensional length | 9150 mm and 9990 mm |
Between tyres width | 2537 mm and 3080 mm |
Wheelbase | 6280 mm and 6960 mm |
Blade base | 2650 mm and 3070 mm |
Operation
Tyre size | 14:00 x 24, G-2 and 15-25 12PR (E-2) |
Operating voltage | 24 V and 24 V |
Overall standard operating weight | 17300 kg and 24748 kg |
Motor
Manufacturer | Volvo and Caterpillar |
Model | D7E and 3406 DITA |
Hydraulic system
Type of pump | axial piston pump and Axial-piston pump |
Overflow valve pressure | 20684.3 kPa and 24131.6 kPa |
Gear box
Forward gears number | 8 and 8 |
Front Axle
General fluctuations | 16 degrees and 32 degrees |
Wheel tilt | 18 degrees and 18 degrees |
Dump
Mouldboard width | 3657.6 mm and 4880 mm |
Mouldboard height | 635 mm and 787 mm |
Mouldboard thickness | 22 mm and 25 mm |
Images
Sizes
1. Dimensional length | 9150 mm | 1. Dimensional length | 9990 mm |
2. Between tyres width | 2537 mm | 2. Between tyres width | 3080 mm |
3. Height to cab upper part | 3225 mm | 3. Height to cab upper part | 3520 mm |
4. Wheelbase | 6280 mm | 4. Wheelbase | 6960 mm |
8. Blade base | 2650 mm | 8. Blade base | 3070 mm |