vs.

      Volvo G976 vs. Volvo G726B

      16 reasons to buy Volvo G976:

      Operation

      Front axle standard operating weight 5600 kg and 4657 kg 17 % more or 943 kg
      Rear axle standard operating weight 14200 kg and 11401 kg 20 % more or 2799 kg
      Fuel Capacity 498 l. and 378.5 l. 24 % more or 119.5 l.
      Cooling system fluid volume 47 l. and 28 l. 40 % more or 19 l.
      Hydraulic system fluid volume 144 l. and 134 l. 7 % more or 10 l.
      Transmission fluid volume 61 l. and 38 l. 38 % more or 23 l.

      Motor

      Displacement 9.4 l. and 7.1 l. 24 % more or 2.3 l.
      Torque measured at 1550 rev / min and 1400 rev / min 10 % more or 150 rev
      Effective speeds output 7-8 195.4 kW and 175.2 kW 10 % more or 20.2 kW
      Maximum power 195.4 kW and 175.2 kW 10 % more or 20.2 kW
      Effective drives torque 7-8 1188 Nm and 1049.4 Nm 12 % more or 138.6 Nm

      Hydraulic system

      Pump flow rate 208 l/min and 284 l/min 27 % less or 76 l/min

      Dump

      Blade pulling at maximum weight 18147 kg and 10260.7 kg 43 % more or 7886.3 kg

      Circle

      Blade tilt front angle 45 degrees and 44 degrees 2 % more or 1 degrees
      Maximum radius outside left tyres 1970 mm and 2019.3 mm 2 % less or 49.3 mm
      Right maximum radius outside tyres 1960 mm and 2006.6 mm 2 % less or 46.6 mm

      6 reasons to buy Volvo G726B:

      Motor

      Power measured at 2200 rev / min and 1700 rev / min 23 % more or 500 rev

      Gear box

      Maximum reverse gear 32.8 km/h and 30.1 km/h 8 % more or 2.7 km/h
      Maximum forward speed 45.9 km/h and 43.8 km/h 5 % more or 2.1 km/h

      Front Axle

      Clearance 610 mm and 590 mm 3 % more or 20 mm

      Dump

      Maximum cutting depth 812.8 mm and 775 mm 5 % more or 37.8 mm

      Circle

      Blade tilt rear angle 6.5 degrees and 6 degrees 8 % more or 0.5 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 21 degrees and 22 degrees

      Sizes

      Height to cab upper part 3225 mm and 3099 mm
      Dimensional length 9500 mm and 9119 mm
      Between tyres width 2780 mm and 2540 mm
      Wheelbase 6531 mm and 6096 mm
      Blade base 2790 mm and 2591 mm

      Operation

      Generator current strength 80 amperes and 80 amperes
      Each tandem case fluid volume 100 l. and 100 l.
      Tyre size 14:00 x 24, G-2 and 14.00 x 24, G-2
      Operating voltage 24 V and 24 V
      Overall standard operating weight 19800 kg and 16057 kg

      Motor

      Model D9B and D7DGDE2
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging
      Cylinders number 6 and 6
      Manufacturer Volvo and Volvo

      Hydraulic system

      Overflow valve pressure 20684.3 kPa and 2700 kPa
      Type of pump axial piston pump and hydraulic system with load sensing

      Gear box

      Transmission type HTE 840, Sequential direct drive gearbox with shifting under load Volvo and powershift transmission
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 18 degrees and 15 degrees
      General fluctuations 16 degrees and 16 degrees

      Dump

      Lowered blade pressure 9776 kg and 8098.4 kg
      Mouldboard width 3657.6 mm and 3657.6 mm
      Mouldboard height 737 mm and 635 mm
      Mouldboard thickness 25 mm and 22.2 mm
      Left lateral displacement 673 mm and 673.1 mm
      Lateral right shift 673 mm and 673.1 mm

      Circle

      Diameter 1626 mm and 1683 mm
      Rotating 360 degrees and 360 degrees
      Left shift 775 mm and 774.7 mm
      Right shift 749 mm and 749.3 mm

      Images

      Sizes

      3. Height to cab upper part 3225 mm 3. Height to cab upper part 3099 mm
      4. Wheelbase 6531 mm 4. Wheelbase 6096 mm
      8. Blade base 2790 mm 8. Blade base 2591 mm
      1. Dimensional length 9500 mm 1. Dimensional length 9119 mm
      2. Between tyres width 2780 mm 2. Between tyres width 2540 mm