vs.

      Case 420CT serie 3 vs. Mustang MTL16

      11 reasons to buy Case 420CT serie 3:

      Sizes

      Ground clearance at maximum lifting and unloading 2420 mm and 2370 mm 2 % more or 50 mm
      Machine rear swing radius from center 1450 mm and 1549 mm 6 % less or 99 mm
      Turning radius with bucket from center 2050 mm and 2362 mm 13 % less or 312 mm

      Operation

      Maximum speed at low range 9.3 km/h and 7.2 km/h 23 % more or 2.1 km/h
      Maximum speed at high range 13.5 km/h and 10.1 km/h 25 % more or 3.4 km/h
      Fuel Capacity 83.3 l. and 75 l. 10 % more or 8.3 l.
      Cooling system fluid volume 11.4 l. and 11 l. 4 % more or 0.4 l.
      Generator current strength 95 amperes and 40 amperes 58 % more or 55 amperes

      Motor

      Full power 55.2 kW and 49 kW 11 % more or 6.2 kW
      Power measured at 2500 rev / min and 2400 rev / min 4 % more or 100 rev
      Peak torque 275.2 Nm and 244 Nm 11 % more or 31.2 Nm

      10 reasons to buy Mustang MTL16:

      Sizes

      Clearance 310 mm and 213 mm 31 % more or 97 mm
      Radius at maximum lifting and unloading 851 mm and 630 mm 26 % more or 221 mm

      Operation

      Engine oil volume 10.2 l. and 8.5 l. 17 % more or 1.7 l.
      Hydraulic system fluid volume 59.8 l. and 50 l. 16 % more or 9.8 l.

      Motor

      Torque measured at 1600 rev / min and 1400 rev / min 12 % more or 200 rev
      Displacement 3.3 l. and 3.2 l. 3 % more or 0.1 l.

      Load-transfer device

      Tipping load 2100 kg and 2592.3 kg 19 % less or 492.3 kg

      Hydraulic system

      Pump flow rate 68 l/min and 90 l/min 24 % less or 22 l/min

      Carrier

      Specific ground pressure 33.5 kPa and 40 kPa 16 % less or 6.5 kPa
      Rolling bearings number on either side 4 and 3 25 % more or 1

      Neutral reasons:

      Sizes

      Width between caterpillar tracks 1651 mm and 1580 mm
      Length with bucket 3290 mm and 3543 mm
      Length without bucket 2600 mm and 2756 mm
      Height to cab upper part 2020 mm and 2123 mm

      Operation

      Working weight 3783 kg and 3401 kg
      Operating voltage 12 V and 12 V

      Motor

      Model 432T/M3 and 4TNV98
      Cylinders number 4 and 4
      Aspiration turbocharging and natural aspiration
      Manufacturer Case and Yanmar

      Load-transfer device

      Workload 1297.3 kg and 1050 kg

      Carrier

      Caterpillar track length on ground level 1438 mm and 1389 mm
      Caterpillar track width 320 mm and 320 mm

      Images

      Sizes

      3. Height to cab upper part 2020 mm 3. Height to cab upper part 2123 mm
      5. Clearance 213 mm 5. Clearance 310 mm
      6. Length without bucket 2600 mm 6. Length without bucket 2756 mm
      7. Ground clearance at maximum lifting and unloading 2420 mm 7. Ground clearance at maximum lifting and unloading 2370 mm
      8. Radius at maximum lifting and unloading 630 mm 8. Radius at maximum lifting and unloading 851 mm
      1. Length with bucket 3290 mm 1. Length with bucket 3543 mm
      2. Width between caterpillar tracks 1651 mm 2. Width between caterpillar tracks 1580 mm

      Carrier

      4. Caterpillar track length on ground level 1438 mm 4. Caterpillar track length on ground level 1389 mm