vs.

      Case 440CT serie 3 vs. Mustang MTL20

      10 reasons to buy Case 440CT serie 3:

      Sizes

      Ground clearance at maximum lifting and unloading 2430 mm and 2408 mm 1 % more or 22 mm
      Machine rear swing radius from center 1450 mm and 1666 mm 13 % less or 216 mm
      Turning radius with bucket from center 2020 mm and 2294 mm 12 % less or 274 mm

      Operation

      Engine oil volume 12 l. and 9.4 l. 22 % more or 2.6 l.
      Generator current strength 95 amperes and 50 amperes 47 % more or 45 amperes
      Maximum speed at low range 8.2 km/h and 7.2 km/h 12 % more or 1.0 km/h
      Maximum speed at high range 12.9 km/h and 10.3 km/h 20 % more or 2.6 km/h

      Motor

      Full power 67.1 kW and 60 kW 11 % more or 7.1 kW
      Displacement 4.5 l. and 3.1 l. 31 % more or 1.4 l.
      Peak torque 390.5 Nm and 258 Nm 34 % more or 132.5 Nm

      12 reasons to buy Mustang MTL20:

      Sizes

      Clearance 325 mm and 236 mm 27 % more or 89 mm
      Radius at maximum lifting and unloading 874 mm and 620 mm 29 % more or 254 mm

      Operation

      Cooling system fluid volume 15.1 l. and 11.4 l. 25 % more or 3.7 l.
      Hydraulic system fluid volume 83 l. and 26.9 l. 68 % more or 56.1 l.
      Fuel Capacity 90 l. and 88.2 l. 2 % more or 1.8 l.

      Motor

      Torque measured at 1800 rev / min and 1300 rev / min 28 % more or 500 rev
      Power measured at 2400 rev / min and 2300 rev / min 4 % more or 100 rev

      Load-transfer device

      Tipping load 2700 kg and 2721.6 kg 1 % less or 21.6 kg

      Hydraulic system

      Pump flow rate 75 l/min and 83 l/min 10 % less or 8 l/min

      Carrier

      Caterpillar track width 457 mm and 400 mm 12 % more or 57 mm
      Specific ground pressure 28.3 kPa and 34.5 kPa 18 % less or 6.2 kPa
      Rolling bearings number on either side 4 and 3 25 % more or 1

      Neutral reasons:

      Sizes

      Width between caterpillar tracks 1812 mm and 1770 mm
      Length with bucket 3290 mm and 3708 mm
      Length without bucket 2600 mm and 2949 mm
      Height to cab upper part 2050 mm and 2167 mm

      Operation

      Operating voltage 12 V and 12 V
      Working weight 4048.3 kg and 4350 kg

      Motor

      Manufacturer Case and Isuzu
      Model 445T/M3 and 4JG1T
      Cylinders number 4 and 4
      Aspiration turbocharging and turbocharging

      Load-transfer device

      Workload 1360.8 kg and 1350 kg

      Carrier

      Caterpillar track length on ground level 1438 mm and 1499 mm

      Images

      Sizes

      6. Length without bucket 2600 mm 6. Length without bucket 2949 mm
      7. Ground clearance at maximum lifting and unloading 2430 mm 7. Ground clearance at maximum lifting and unloading 2408 mm
      8. Radius at maximum lifting and unloading 620 mm 8. Radius at maximum lifting and unloading 874 mm
      1. Length with bucket 3290 mm 1. Length with bucket 3708 mm
      2. Width between caterpillar tracks 1812 mm 2. Width between caterpillar tracks 1770 mm
      3. Height to cab upper part 2050 mm 3. Height to cab upper part 2167 mm
      5. Clearance 236 mm 5. Clearance 325 mm

      Carrier

      4. Caterpillar track length on ground level 1438 mm 4. Caterpillar track length on ground level 1499 mm