- Home/
- Comparison/
- Rough Terrain Truck/
- Case 440CT vs. Gehl CTL85
Case 440CT vs. Gehl CTL85
12 reasons to buy Case 440CT:
Sizes
Ground clearance at maximum lifting and unloading | 2450 mm and 2430 mm | 1 % more or 20 mm |
Machine rear swing radius from center | 1480 mm and 1816 mm | 19 % less or 336 mm |
Turning radius with bucket from center | 2040 mm and 2692 mm | 24 % less or 652 mm |
Operation
Cooling system fluid volume | 17 l. and 16.5 l. | 3 % more or 0.5 l. |
Generator current strength | 95 amperes and 80 amperes | 16 % more or 15 amperes |
Maximum speed at low range | 8.2 km/h and 7.7 km/h | 6 % more or 0.5 km/h |
Maximum speed at high range | 12.2 km/h and 12.1 km/h | 1 % more or 0.1 km/h |
Motor
Power measured at | 2300 rev / min and 2200 rev / min | 4 % more or 100 rev |
Peak torque | 357 Nm and 325.4 Nm | 9 % more or 31.6 Nm |
Displacement | 4.5 l. and 3.8 l. | 16 % more or 0.7 l. |
Load-transfer device
Tipping load | 2721 kg and 3200 kg | 15 % less or 479 kg |
Hydraulic system
Pump flow rate | 83 l/min and 88.6 l/min | 6 % less or 5.6 l/min |
10 reasons to buy Gehl CTL85:
Sizes
Clearance | 345 mm and 229 mm | 34 % more or 116 mm |
Radius at maximum lifting and unloading | 1049 mm and 590 mm | 44 % more or 459 mm |
Operation
Fuel Capacity | 108 l. and 83.3 l. | 23 % more or 24.7 l. |
Engine oil volume | 13.2 l. and 12 l. | 9 % more or 1.2 l. |
Hydraulic system fluid volume | 60.1 l. and 50 l. | 17 % more or 10.1 l. |
Motor
Torque measured at | 1600 rev / min and 1400 rev / min | 12 % more or 200 rev |
Full power | 68.6 kW and 66 kW | 4 % more or 2.6 kW |
Carrier
Specific ground pressure | 31 kPa and 34.5 kPa | 10 % less or 3.5 kPa |
Rolling bearings number on either side | 5 and 3 | 40 % more or 2 |
Caterpillar track width | 457 mm and 400 mm | 12 % more or 57 mm |
Neutral reasons:
Sizes
Width between caterpillar tracks | 1802 mm and 1884 mm |
Length with bucket | 3230 mm and 3985 mm |
Length without bucket | 2640 mm and 3135 mm |
Height to cab upper part | 1950 mm and 2217 mm |
Operation
Working weight | 4043 kg and 5090 kg |
Operating voltage | 12 V and 12 V |
Motor
Cylinders number | 4 and 4 |
Aspiration | turbocharging and turbocharging |
Manufacturer | Case and Kubota |
Model | Family III 445T/M2 and V3800DI-T |
Load-transfer device
Workload | 1361 kg and 1600 kg |
Hydraulic system
Overflow valve pressure | 20684.3 kPa and 20601.5 kPa |
Carrier
Caterpillar track length on ground level | 1436 mm and 1598 mm |
Images
Sizes
1. Length with bucket | 3230 mm | 1. Length with bucket | 3985 mm |
2. Width between caterpillar tracks | 1802 mm | 2. Width between caterpillar tracks | 1884 mm |
3. Height to cab upper part | 1950 mm | 3. Height to cab upper part | 2217 mm |
5. Clearance | 229 mm | 5. Clearance | 345 mm |
6. Length without bucket | 2640 mm | 6. Length without bucket | 3135 mm |
7. Ground clearance at maximum lifting and unloading | 2450 mm | 7. Ground clearance at maximum lifting and unloading | 2430 mm |
8. Radius at maximum lifting and unloading | 590 mm | 8. Radius at maximum lifting and unloading | 1049 mm |
Carrier
4. Caterpillar track length on ground level | 1436 mm | 4. Caterpillar track length on ground level | 1598 mm |