- Home/
- Comparison/
- Rough Terrain Truck/
- Case 445CT vs. Takeuchi TL140
Case 445CT vs. Takeuchi TL140
11 reasons to buy Case 445CT:
Sizes
Machine rear swing radius from center | 1550 mm and 1666.2 mm | 7 % less or 116.2 mm |
Turning radius with bucket from center | 2130 mm and 2293.6 mm | 7 % less or 163.6 mm |
Operation
Maximum speed at low range | 8.2 km/h and 7.4 km/h | 10 % more or 0.8 km/h |
Maximum speed at high range | 12.8 km/h and 10.6 km/h | 17 % more or 2.2 km/h |
Cooling system fluid volume | 17 l. and 15.1 l. | 11 % more or 1.9 l. |
Engine oil volume | 12 l. and 9.6 l. | 20 % more or 2.4 l. |
Generator current strength | 95 amperes and 50 amperes | 47 % more or 45 amperes |
Motor
Displacement | 4.5 l. and 3.1 l. | 31 % more or 1.4 l. |
Peak torque | 320 Nm and 261.7 Nm | 18 % more or 58.3 Nm |
Load-transfer device
Breakout power | 2343.7 kg and 3357.9 kg | 30 % less or 1014.2 kg |
Carrier
Specific ground pressure | 27.6 kPa and 28.3 kPa | 2 % less or 0.7 kPa |
12 reasons to buy Takeuchi TL140:
Sizes
Clearance | 325.1 mm and 229 mm | 30 % more or 96.1 mm |
Ground clearance at maximum lifting and unloading | 3121.7 mm and 2340 mm | 25 % more or 781.7 mm |
Radius at maximum lifting and unloading | 873.8 mm and 860 mm | 2 % more or 13.8 mm |
Operation
Fuel Capacity | 90.1 l. and 65.5 l. | 27 % more or 24.6 l. |
Hydraulic system fluid volume | 51.9 l. and 41.5 l. | 20 % more or 10.4 l. |
Motor
Torque measured at | 1800 rev / min and 1400 rev / min | 22 % more or 400 rev |
Full power | 60.4 kW and 60 kW | 1 % more or 0.4 kW |
Power measured at | 2500 rev / min and 2300 rev / min | 8 % more or 200 rev |
Load-transfer device
Tipping load | 2699.8 kg and 3175 kg | 15 % less or 475.2 kg |
Hydraulic system
Pump flow rate | 75 l/min and 80 l/min | 6 % less or 5 l/min |
Carrier
Rolling bearings number on either side | 5 and 4 | 20 % more or 1 |
Caterpillar track width | 457.2 mm and 450 mm | 2 % more or 7.2 mm |
Neutral reasons:
Sizes
Length with bucket | 3440 mm and 3708.4 mm |
Height to cab upper part | 2030 mm and 2270.8 mm |
Width between caterpillar tracks | 2098 mm and 1770.4 mm |
Operation
Working weight | 4452 kg and 4350 kg |
Operating voltage | 12 V and 12 V |
Motor
Model | Family III 445/M2 and 4JG1T |
Cylinders number | 4 and 4 |
Manufacturer | Case and Isuzu |
Load-transfer device
Workload | 1588 kg and 944.8 kg |
Hydraulic system
Overflow valve pressure | 20684.3 kPa and 20601.5 kPa |
Carrier
Caterpillar track length on ground level | 1645 mm and 1496 mm |
Images
Sizes
3. Height to cab upper part | 2030 mm | 3. Height to cab upper part | 2270.8 mm |
5. Clearance | 229 mm | 5. Clearance | 325.1 mm |
7. Ground clearance at maximum lifting and unloading | 2340 mm | 7. Ground clearance at maximum lifting and unloading | 3121.7 mm |
8. Radius at maximum lifting and unloading | 860 mm | 8. Radius at maximum lifting and unloading | 873.8 mm |
1. Length with bucket | 3440 mm | 1. Length with bucket | 3708.4 mm |
2. Width between caterpillar tracks | 2098 mm | 2. Width between caterpillar tracks | 1770.4 mm |
Carrier
4. Caterpillar track length on ground level | 1645 mm | 4. Caterpillar track length on ground level | 1496 mm |