vs.

      Case TR270 vs. Takeuchi TL240

      8 reasons to buy Case TR270:

      Sizes

      Ground clearance at maximum lifting and unloading 2500 mm and 2408 mm 4 % more or 92 mm
      Machine rear swing radius from center 1597.7 mm and 1670 mm 4 % less or 72.3 mm
      Turning radius with bucket from center 2029.5 mm and 2362 mm 14 % less or 332.5 mm

      Operation

      Generator current strength 95 amperes and 40 amperes 58 % more or 55 amperes
      Maximum speed at low range 9.3 km/h and 7.6 km/h 18 % more or 1.7 km/h
      Maximum speed at high range 13.4 km/h and 11.6 km/h 13 % more or 1.8 km/h

      Load-transfer device

      Tipping load 2449.4 kg and 2699 kg 9 % less or 249.6 kg

      Hydraulic system

      Pump flow rate 31 l/min and 76 l/min 59 % less or 45 l/min

      12 reasons to buy Takeuchi TL240:

      Sizes

      Clearance 325 mm and 203 mm 38 % more or 122 mm
      Radius at maximum lifting and unloading 875 mm and 568 mm 35 % more or 307 mm

      Operation

      Fuel Capacity 90 l. and 75.7 l. 16 % more or 14.3 l.
      Engine oil volume 10.2 l. and 9.5 l. 7 % more or 0.7 l.
      Hydraulic system fluid volume 75 l. and 32.2 l. 57 % more or 42.8 l.

      Motor

      Full power 64.1 kW and 55.2 kW 14 % more or 8.9 kW
      Effective power 61.9 kW and 52.2 kW 16 % more or 9.7 kW
      Peak torque 296.9 Nm and 275.2 Nm 7 % more or 21.7 Nm
      Torque measured at 1850 rev / min and 1400 rev / min 24 % more or 450 rev
      Displacement 3.3 l. and 3.2 l. 3 % more or 0.1 l.

      Carrier

      Specific ground pressure 30.3 kPa and 39.3 kPa 23 % less or 9.0 kPa
      Caterpillar track width 450 mm and 320 mm 29 % more or 130 mm

      Neutral reasons:

      Sizes

      Width between caterpillar tracks 1700 mm and 1770 mm
      Length with bucket 3300 mm and 3810 mm
      Height to cab upper part 2000 mm and 2270 mm

      Operation

      Working weight 3719.5 kg and 4701 kg
      Operating voltage 12 V and 12 V

      Motor

      Manufacturer Case and Yanmar
      Model 432T/M3 and 4TNV98I
      Power measured at 2500 rev / min and 2500 rev / min
      Cylinders number 4 and 4
      Aspiration turbocharging and turbocharging

      Load-transfer device

      Workload 1224.7 kg and 944 kg

      Images

      Sizes

      1. Length with bucket 3300 mm 1. Length with bucket 3810 mm
      2. Width between caterpillar tracks 1700 mm 2. Width between caterpillar tracks 1770 mm
      3. Height to cab upper part 2000 mm 3. Height to cab upper part 2270 mm
      5. Clearance 203 mm 5. Clearance 325 mm
      7. Ground clearance at maximum lifting and unloading 2500 mm 7. Ground clearance at maximum lifting and unloading 2408 mm
      8. Radius at maximum lifting and unloading 568 mm 8. Radius at maximum lifting and unloading 875 mm